Maytag W10239461A warranty Troubleshooting

Page 13

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference the Customer Care section to possibly avoid the cost of

a service call.

www.maytag.ca

Nothing will operate

■Is the power supply cord unplugged? Plug into a grounded outlet.

■Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Cooktop will not operate

■Is the control knob set correctly? Push in knob before turning to a setting.

■On ceramic glass models, is the oven control lockout set? See the control lock keypad feature in the “Feature Guide” section.

■Has a self-clean cycle been selected?

On some ceramic glass models, the cooktop will not operate during a self-clean cycle.

Display shows messages

■Is the display showing a flashing time?

There has been a power failure. Clear the display. On some models, reset the clock, if needed. See “Clock” keypad feature in the “Feature Guide” section.

■Is the display showing a letter followed by a number? Press the Cancel keypad to clear the display. See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for service. See cover for contact information.

Self-Cleaning cycle will not operate

■Is the oven door open?

Close the oven door all the way.

■Has the function been entered? See “Self-Cleaning Cycle” section.

■Has a delay start been set? See “Timed Cooking” section.

Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

■Is the control knob set to the proper heat level? See “Cooktop Use” section.

■Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

■Is the electronic oven control set correctly? See “Electronic Oven Controls” section.

■Has a delay start been set? See “Timed Cooking” section.

■On some models, is the oven control lockout set?

See the control lock keypad feature in the “Feature Guide” section.

Oven temperature too high or too low

■Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section of the “Electronic Oven Controls” section.

Oven indicator lights flash

■Do the oven indicator lights flash?

See “Control Display” in the “Electronic Oven Controls” section. If the indicator light(s) keeps flashing, call for service. See cover for contact information.

Oven cooking results not what expected

■Is the range level?

Level the range. See the Installation Instructions.

■Is the proper temperature set? Double-check the recipe in a reliable cookbook.

■Is the proper oven temperature calibration set?

See “Oven Temperature Control” section of the “Electronic Oven Controls” section.

■Was the oven preheated?

See “Baking and Roasting” section.

■Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

■Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section.

■Is the batter evenly distributed in the pan? Check that batter is level in the pan.

■Is the proper length of time being used? Adjust cooking time.

■Has the oven door been opened while cooking? Oven peeking releases oven heat and can result in longer cooking times.

■Are baked items too brown on the bottom? Move rack to higher position in the oven.

■Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Electric Range User Instructions Range SafetyAnti-Tip Bracket Important Safety Instructions Feature Guide Delay Start Keypad Feature Instructions WarmingCancel Center Start ON/OFFCooktop USE Electronic Oven Controls Oven USESabbath Mode Positioning Racks and Bakeware Aluminum FoilOven Vent BakewareBroiling Baking and RoastingConvection Cooking Timed CookingGeneral Cleaning Self-Cleaning CycleRange Care Appliance Outlets on some models Oven LightTo Replace Appliance Outlet Circuit BreakerTroubleshooting Maytag Major Appliance Warranty AccessoriesDisclaimer of Implied Warranties Limitation of Remedies Sécurité DE LA Cuisinière Instructions Dutilisation DE LA Cuisinière ÉlectriqueLa bride antibasculement Conservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Kitchen Timer Clavier Caractéristique Instructions Self CleanGuide DES Caractéristiques Center Clavier Caractéristique Instructions FavoriteConvect Broil Utilisation DE LA Table DE Cuisson Élément centre de maintien au chaud Zone DE Cuisson Speed Heat sur certains modèlesÉlément de liaison Utilisation DU Four Commandes électroniques du fourPapier d’aluminium Mode SabbatPositionnement des grilles et des ustensiles de cuisson Cuisson au four et rôtissage Évent du fourCuisson au gril Cuisson par convectionCuisson minutée Entretien DE LA CuisinièreProgramme d’autonettoyage Autonettoyage Nettoyage généralSurfaces Externes EN Émail Vitrifié sur certains Lampe du four DépannagePrises pour appareils électroménagers sur certains modèles Le programme d’autonettoyage ne fonctionne pas Des messages saffichentNettoyant tout-usage pour appareils ménagers Trousse dentretien de la table de cuissonArticles Exclus DE LA Garantie Garantie LimitéeLa présente garantie limitée ne couvre pas W10239461A

W10239461A specifications

The Maytag W10239461A is a high-quality appliance component designed to enhance the functionality and efficiency of Maytag washing machines. This specific part is recognized for its durability and reliability, making it an essential choice for appliance repairs and maintenance.

One of the standout features of the W10239461A is its compatibility with a range of Maytag washer models. This versatility ensures that the part can be used across various machines, simplifying the repair process for homeowners and technicians alike. Its design is tailored to meet the rigorous standards set forth by Maytag, guaranteeing a perfect fit and optimal performance.

In terms of technology, the W10239461A incorporates advanced engineering principles that enable seamless operation within the washing machine. It not only enhances the overall performance of the appliance but also contributes to energy efficiency. This part is manufactured with high-quality materials that resist wear and tear, ensuring a long lifespan and reduced need for frequent replacements.

Another significant characteristic of the W10239461A is its user-friendly installation process. The part is designed for straightforward replacement, enabling even those with minimal technical skills to undertake repairs without the need for professional help. This user-centric approach saves time and money, making it a valuable addition to any DIY enthusiast's toolkit.

Moreover, the W10239461A is engineered to minimize noise and vibration during the wash cycle, resulting in a quieter laundry experience. This feature enhances the convenience of using the washing machine, particularly in homes where laundry is done during late hours or in close quarters.

To sum up, the Maytag W10239461A is a vital component for Maytag washing machines, offering compatibility, durability, and ease of installation. Its advanced technology ensures efficient operation while minimizing disturbances, making it a reliable choice for anyone looking to maintain or repair their washing machine. Investing in the W10239461A means investing in quality and performance, ensuring your washing machine continues to run smoothly for years to come.
Top Page Image Contents