Dimplex EOS2006 service manual Circuit Board Replacement

Page 10

EOS2006

If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin.

Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.

CIRCUIT BOARD REPLACEMENT

1.Open door by pulling the handles.

2.Remove the screw from the logset located in the center of the emberbed and remove the logset from the unit

3.While holding the mirror to prevent it from moving, remove the 2 mirror retaining bracket screws. Carefully remove the mirror and store in a safe place to prevent damage.

4.Remove the 3 screws securing rear reflector to the unit.

5.Locate the circuit board on the underside of the rear reflector bracket.

6.Remove wiring connections from circuit board noting their original locations.

7.From the underside of the circuit board, break off the 4 mounting studs by grasping with pliers and twisting on the protruding part of the stud, push the remainder of the studs out through the top panel.

8.NOTE: New mounting studs are supplied with the replacement circuit board

9.Reassemble in the reverse order as above.

9

Image 10
Contents For Table of Contents Towel Warmer ON/OFF Switch Main ON/OFF SwitchBeverage Cooler Towel Warmer Towels in CompartmentPage Replacement Part Catalogue noWiring Diagram Helpful Hints Light Bulb RequirementsFlame ROD and Motor Replacement Circuit Board Replacement Main Warmer Main Warmer

EOS2006 specifications

The Dimplex EOS2006 is a cutting-edge electric heater designed for modern living spaces, renowned for its blend of efficiency, style, and innovative technology. This versatile heating solution is engineered to provide comfortable warmth while seamlessly integrating into a variety of home aesthetics.

One of the standout features of the EOS2006 is its impressive heating capacity, making it suitable for a range of room sizes. With a powerful output of 2000W, it ensures rapid and even heat distribution, effectively warding off the chill in larger areas. The unit is equipped with an advanced convection heating system, allowing it to warm the air quickly while maintaining consistent comfort levels.

The EOS2006 also showcases Dimplex's commitment to energy efficiency. It is designed with a programmable timer and thermostat, allowing users to set specific heating schedules tailored to their daily routines. This functionality not only enhances convenience but also significantly reduces energy consumption, resulting in lower utility bills over time.

Smart technology takes center stage with the EOS2006, as it features Wi-Fi connectivity and compatibility with smart home systems. Users can control their heating remotely via a dedicated app on their smartphones, making it possible to adjust settings even when away from home. This integration with smart home technology empowers users to maintain optimal comfort with minimal effort.

Safety is a paramount consideration in the design of the EOS2006. It is equipped with multiple safety features, including overheat protection and a tip-over switch, ensuring peace of mind while in use. These safety mechanisms are particularly crucial in homes with pets or children, enhancing the unit's overall reliability.

In terms of aesthetics, the Dimplex EOS2006 boasts a sleek and modern design, available in various finishes to complement any interior décor. Its minimal footprint allows for flexible placement in various locations, whether it be mounted on a wall or positioned free-standing in a room.

Overall, the Dimplex EOS2006 stands out as a versatile and efficient heating solution. With its combination of innovative technologies, user-friendly features, safety considerations, and stylish design, it is an ideal choice for those seeking to enhance their indoor comfort while being mindful of energy consumption. As homes continue to evolve, the EOS2006 exemplifies the future of electric heating in residential spaces.