Cannon C90DPX manual

Gas connection using a flexible rubber hose

Make sure that the hose complies with current national legislation. The internal diameter of the hose must measure: 8 mm for liquid gas supply; 13 mm for methane gas supply.

Once the connection has been performed, make sure that the hose:

•Does not come into contact with any parts that reach temperatures of over 50°C.

•Is not subject to any pulling or twisting forces and that it is not kinked or bent.

•Does not come into contact with blades, sharp corners or moving parts and that it is not compressed.

•Is easy to inspect along its whole length so that its condition may be checked.

•Is shorter than 1500 mm.

•Fits firmly into place at both ends, where it will be fixed using clamps that comply with current regulations.

If one or more of these conditions is not fulfilled or

if the cooker must be installed according to the conditions listed for class 2 - subclass 1 appliances (installed between two cupboards), the flexible steel hose must be used instead (see below).

Connecting a flexible jointless stainless steel pipe to a threaded attachment

Make sure that the hose and gaskets comply with current national legislation.

To begin using the hose, remove the hose holder on the appliance (the gas supply inlet on the appliance is a cylindrical threaded 1/2 gas male attachment).

Perform the connection in such a way that the hose length does not exceed a maximum of 2 metres, making sure that the hose is not compressed and does not come into contact with moving parts.

Checking the tightness of the connection

When the installation process is complete, check the hose fittings for leaks using a soapy solution. Never use a flame.

Adapting to different types of gas

It is possible to adapt the appliance to a type of gas other than the default type (this is indicated on the rating label on the cover).

Adapting the hob

Replacing the nozzles for the hob burners:

1.Remove the hob grids and slide the burners off their seats.

2. Unscrew the nozzles using a 7 mm socket spanner (see

figure), and replace them with nozzles suited to the new type of

gas (see Burner and nozzle specifications table).

3.Replace all the components

by following the above

instructions in reverse.

Adjusting the hob burners’ minimum setting:

1.Turn the tap to the minimum position.

2.Remove the knob and adjust the regulatory screw, which is positioned inside or next to the tap pin, until the flame is small but steady.

If the appliance is connected to a liquid gas supply, the regulatory screw must be fastened as tightly as possible:

3.While the burner is alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame is not extinguished.

The hob burners do not require primary air adjustment.

After adjusting the appliance so it may be used with a different type of gas, replace the old rating label with a new one that corresponds to the new type of gas (these labels are available from Authorised Technical Assistance Centres).

Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet hose in accordance with current national regulations relating to “regulators for channelled gas”.

C90DPX specifications

The Cannon C90DPX is an innovative printer that has emerged as a game-changer in the world of digital printing. Designed for both small businesses and larger enterprises, the C90DPX marries efficiency with high-quality output, making it a preferred choice for many professionals.

One of the main features of the Cannon C90DPX is its impressive print speed. With a maximum output of up to 90 pages per minute, this printer can handle high-volume jobs with ease. The efficiency does not compromise the quality; it offers exceptional resolution with sharp text and vibrant images, thanks to its advanced imaging technology.

The printer utilizes a sophisticated inkjet technology that allows for a wider color gamut and more precise color reproduction. This feature is crucial for businesses that require high-quality brochures, presentations, or marketing materials. The printer also supports a variety of media types, including glossy photo paper, cardstock, and specialty media, making it versatile enough to meet different printing needs.

Another notable characteristic of the Cannon C90DPX is its user-friendly interface. The printer comes equipped with a touchscreen display that simplifies navigation and settings adjustments. This intuitive design minimizes the learning curve for new users and can enhance overall productivity.

Connectivity options are another strong suit of the C90DPX. The printer supports USB, Ethernet, and Wi-Fi connections, allowing users to print from various devices, including laptops, tablets, and smartphones. This wireless capability makes it convenient for multi-user environments and remote printing projects, keeping productivity seamless across different locations.

The Cannon C90DPX also emphasizes sustainability. It is designed for energy efficiency, significantly reducing power consumption without sacrificing performance. Furthermore, the printer has features that facilitate the use of eco-friendly inks and recyclable materials, aligning with the increasing need for environmentally conscious practices in business operations.

In conclusion, the Cannon C90DPX stands out in the digital printing landscape due to its combination of speed, quality, and user-friendly features. With advanced technologies that enhance connectivity and sustainability, it represents a significant investment for businesses looking to streamline their printing processes while maintaining top-notch output. Whether for marketing materials, internal documents, or creative projects, the C90DPX proves to be a robust solution that combines functionality with cutting-edge technology.