Avanti G2407CB, G2002CW, G2405CSS, G2006CB ← Burners and Grids, Correct Replacement of the Burners

←BURNERS AND GRIDS

Do not use steam jet cleaners because the humidity could infiltrate into the appliance making it dangerous.

These parts can be removed and cleaned with appropriate products.

After cleaning, the burners and their flame distributors must be well dried and correctly replaced.

It is very important to check that the burner flame distributor and the cap has been correctly positioned - failure to do so can cause serious problems.

In appliances with electric ignition keep the electrode clean so that the sparks always strike.

Note: To avoid damage to the electric ignition do not use it when the burners are not in place.

CORRECT REPLACEMENT OF THE BURNERS

It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly positioned (see figs. 20 and 21). Failure to do so can cause serious problems.

Figure 20 Figure 21

In appliances with electric ignition, check that the electrode “S” (fig. 20) is always clean to ensure trouble-free sparking.

The ignition plug must be very carefully cleaned.

← OVEN SHELF INSTALLATION AND REMOVAL	Figure 22
The oven shelves are provided with a
security block to prevent accidental
extraction. They must be inserted
operating as per figure 22.
To pull them out remove shelf in the
inverse order.
Keep attention to insert the shelves cor-
rectly (see side figure).

23