Bosch Appliances HDS7052U Setting the Probe, Changing the Oven Temperature, When Using the Probe

Page 27

 

 

Operation - Oven

Setting the Probe

1.

Prepare meat and place in roasting pan (or on rack in roasting pan as recipe

 

 

specifies). Insert the probe into the meat. See “Inserting the Probe” on

 

 

page 31 for detailed instructions. Make sure the probe is not touching gris-

 

 

tle, fat, bone, the roast rack or the pan.

 

 

Note:

 

 

Do not connect to probe receptacle until probe tip is properly inserted

 

 

into meat.

 

2.

Place roasting pan with meat in cold oven on recommended oven rack. Plug

 

 

probe into the probe receptacle. The probe symbol will appear in display.

 

 

Note:

 

 

The probe temperature can only be set when the probe is installed in

 

 

the oven.

 

3.

Press COOKING MODE and select BAKE, CONVECTION BAKE or CON-

 

 

VECTION ROAST.

 

4.

Press START. The default oven temperature will appear.

 

5.

Turn knob to change oven temperature if necessary.

 

6.

Touch START.

 

7.

Turn knob to set the probe temperature (desired end temperature of the

 

 

food).

 

8.

Press START.

 

The chosen oven temperature is displayed in the upper right hand corner of the

 

display.

 

The probe temperature is displayed in the center to the left of the cooking mode.

 

It starts at 80 degrees and increases in 5°F increments until the chosen probe

 

temperature is reached.

 

The oven is preheated when the beep signals once.

 

When the set probe temperature is reached, END appears in display and oven

 

turns off.

Changing the Oven Temperature

1. Touch TEMPERATURE. Oven temp will flash in the display.

When Using the Probe

2.

Turn the knob to desired temperature and press START twice.

Changing the Probe Temperature

1. Touch TEMPERATURE. The oven temperature will flash.

 

2.

Press START and PROBE TEMP will flash.

 

3.

Turn the knob to desired temperature and press START again.

Note:

Always remove probe from oven when cooking is complete. The probe symbol will remain in the display until the probe is removed. Do not leave probe attachment in oven during self-clean. Oven will not self-clean with the probe installed in the oven

English 25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Use and Care Manual Table of Contents How This Manual Is Organized About This ManualFire Safety SafetyImportant Safety Instructions Important Safety Instruc- tionsRange TOP Grease FIRE, Observe the Following Gas SafetyBurn Prevention Child SafetyCleaning Safety Cookware SafetyProper Installation and Maintenance Tipping Precautions Food SafetyParts and Accessories Getting StartedPart Burner Grates Sealed Gas BurnersBurner Caps Diffusion Burner CapsModels with Glass Ceramic Cooktop Left Side Burner Grate Right SideOven Racks High Power BurnerElectronic Ignitor Precision BurnerDisassembly for cleaning Removing Flat Racks From OvenRemoving and Replacing Half Oven Rack Some Models ReassemblyCleaning Closed Position Back of Rack Stop Ball Front of RackOven Bottom Combustion Vents slide-in models only Oven Vent Free-standing ModelsSlide-in Models Getting Started Oven Control Panel Control PanelSelect Functions Menu ClockChange the Beep Volume Change the TemperatureScale Reset the Factory Set- tings Set the Sabbath Feature About the Sabbath FeatureSetting the Sabbath Feature for the Oven Only Setting the Sabbath Feature for the Warming Drawer Only Before Using the Appliance for the First TimeOperation Setting the Burner Heat LevelOperation Cooktop About the CooktopPage Automatic Convection Conversion models with convection bake Setting the Cooking Mode and TemperatureOperation Oven About the Oven OperationUsing Timed or Delayed Cook Using the TimerUsing the Probe some models Delaying the Start of a Timed ModeSetting the Sabbath Feature Changing the Probe Temperature Setting the ProbeChanging the Oven Temperature When Using the ProbeOperation Warming Drawer some models About the Warming DrawerWarming Drawer Specifi- cations Preheating Turning on the Warming DrawerTurning Off the Warming Drawer Warming Empty Serving Bowls and Plates Crisping Stale ItemsCookware Selection Guide Getting the Most Out of Your ApplianceGetting the Most Out of Your Cooktop Cooktop Cooking GuideOven Cooking Guide Getting the Most Out of Your OvenInserting the Probe Baking PansPreheating the Oven Probe some modelsOven Cooking Modes For Best Results Convection Broil some models For Best Results Dehydrate General Tips Getting the Most Out Your Warming DrawerFood Temperature Covered Uncovered Avoid these Cleaners Cleaning and MaintenanceCleaning Cooktop Daily Cleaning Cleaning GuidelinesExterior Finish / Stainless Control Knobs / PlasticGreasy spatters Spills. Melted plastic film or foil. All theseBurned-on food soil, dark streaks, SpecksDaily Cleaning Cleaning OvenPreparing the Oven for Self Clean Self Cleaning the OvenSelf Clean After Self-Cleaning Cleaning Drawers Storage or WarmingMaintenance Cooktop MaintenanceReplacing the Oven Door Oven MaintenanceStainless Steel Cooktop Models Removing the DoorReplacing an Oven Light Cooktop Problem Possible Causes and Suggested Solutions ServiceBefore Calling Service Troubleshooting ChartsOven Oven Problem Possible Causes Suggested SolutionsProduct Data Plate How to Obtain Service or PartsWarranty What this Warranty Covers & Who it Applies toOut of Warranty Product Warranty ExclusionsRepair/Replace as Your Exclusive Remedy How to Obtain Warranty Service

HDS7052U specifications

The Bosch Appliances HDS7052U is an impeccable blend of style, functionality, and cutting-edge technology designed to meet the demands of modern kitchens. This versatile dishwasher is part of Bosch's flagship 800 Series, known for its advanced engineering and superior performance.

One of the most notable features of the HDS7052U is its efficient and quiet operation. With a noise level of a mere 42 decibels, it is one of the quietest dishwashers available, ensuring that your kitchen remains a tranquil space while it works tirelessly to clean your dishes. The dishwasher’s sleek design includes a fully integrated panel that seamlessly blends into your cabinetry, providing a sophisticated look without compromising on style.

The HDS7052U offers a flexible loading system with a third rack design that maximizes loading capacity and accommodates large utensils and cutlery. This innovative feature enhances overall space usage, allowing users to load dishes efficiently. The dishwasher has a capacity of 16 place settings, making it ideal for families or those who frequently entertain guests.

Equipped with the AutoAir feature, the HDS7052U opens the door automatically at the end of a cycle to allow steam to escape, improving drying performance. The Heat Exchanger technology ensures that dishes receive optimal cleaning while protecting fragile items from damage due to temperature shock.

The dishwasher also boasts several wash cycles, including Heavy, Auto, Normal, and Rinse. The Eco cycle is particularly noteworthy as it focuses on energy efficiency, minimizing water and energy consumption while still delivering effective cleaning performance. Users can also utilize the Sanitize option, which meets NSF/ANSI Standard 184 for disinfection.

For ultimate convenience, the HDS7052U is equipped with a Smart Control system, which allows users to monitor and control the dishwasher from their smartphones or other smart devices. This feature adds significant value, as it enables users to start, stop, or check the status of their dishwasher remotely.

In conclusion, the Bosch Appliances HDS7052U combines state-of-the-art technology with innovative design and user-friendly features, making it a top choice for those looking to enhance their kitchen experience. With its quiet operation, efficient cleaning capabilities, and smart features, the HDS7052U is a testament to Bosch’s commitment to quality and sustainability in home appliances.
Top Page Image Contents