Blodgett warranty Models B36-GGG and B36-TTT, Utility Information, Other Technical Information

Page 2

MODELS B36-GGG AND B36-TTT

APPROVAL/STAMP

SHORT FORM SPECIFICATIONS

The item shall be a 36"-wide front-manifold sectional range with a full width (thermostatic) griddle with three 32,000 BTU sections, a 1” thick steel surface with side splashers and a grease drawer with a capacity of 3/4 gallon. The item shall have a 7" front rail and a belly bar. The item shall have 6" adjustable legs [casters]. The item shall have a [5" 24" 36"] flue riser able to support 250 pounds. The exterior (except for the back) shall be constructed of 430 stainless steel #3 polish. If the item is at the end of a battery, the end side shall be solid (rather than have a coverplate over the end of the front manifold).

Model 36A: The item shall have a 45,000 BTU convection oven with standing pilot and a thermostat range of 150°F to 550°F (66°C to 288°C). The oven interior shall be porcelain, meas- ure 14" high x 26" wide x 24" deep, and have two racks with five-position side-rails with 2-1/4" between positions. The blower fan shall have two speeds and a 1/3 hp motor.

Model 36D: The item shall have a 45,000 BTU standard oven with standing pilot and a thermostat range of 150°F to 550°F (66°C to 288°C). The oven interior shall be porcelain, meas- ure 14" high x 26" wide x 26.5" deep, and have two racks with five-position side-rails with 2-1/4" between positions.

Model 36C: The item shall have a cabinet base with two side-by-side stainless steel doors.

 

UTILITY INFORMATION

 

GAS: Each unit has a 1-1/4" front gas manifold that couples to the adjacent sectional unit(s), and can be

 

 

 

 

 

 

ordered with a 1" rear gas connection with a male NPT connector. Minimum supply pressure is 7" W.C.

 

 

GAS (BTU/hr)

ELECTRICITY (amp)

MODEL

 

for natural gas, 11" W.C. for propane. An external pressure regulator and shut off valve must be provided.

 

Natural Gas

Propane

120V

208/240V

 

 

If using a flexible-hose gas connection, the I.D. of the hose must not be smaller than the connector on the

 

 

 

 

 

 

unit and must comply with ANSI Z21.69. Provide an adequate means of restraint to prevent undue strain

B36A-GGG/TTT

 

141,000

126,000

4.8

2.6

 

on the gas connection.

 

 

 

 

 

 

B36D-GGG/TTT

 

141,000

126,000

1.0

1.0

ELECTRICITY: Both standard-oven and convection-oven models require electric power (50Hz or 60Hz sin-

 

 

 

 

 

 

gle-phase AC). 120V models have a 7-foot (2134 mm) power cord with a grounded plug. 208/240V mod-

B36C-GGG/TTT

 

96,000

84,000

-

-

 

els have a terminal block for connection to a single-phase 208/240V source.

 

 

 

 

 

 

B36N-GGG/TTT

 

96,000

84,000

-

-

FLUE EXHAUST: Installation under a vented hood is recommended.

 

 

 

 

 

 

 

OTHER TECHNICAL INFORMATION

Exterior surfaces are 430 stainless steel #3 polish, except the back is aluminized steel.

Each burner has a separate control knob located on the front panel. On oven models, a gas valve for the oven is located on the front panel above the oven. The oven control panel is located to the left of the oven door and includes an on-off switch, indicator light, thermostat knob, and (on convection ovens) a speed selector switch for the blower motor. The fan motor for convection ovens is 1/3 hp, 2-speed, 1725/1140 rpm, with overload protection. Check local codes for fire and sanitary regulations.

NOTE: The company reserves the right to make substitutions of components without prior notice

BLODGETT

www.blodgett.com

1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA • Phone: (877) 255-3976 • Fax: (866) 644-1354

Printed in U.S.A.

NOTE: FOR COMMERCIAL USE ONLY

P/N BR00027 Rev D (6/08)

Image 2
Contents Specify Options and AccessoriesGGG Other Technical Information Models B36-GGG and B36-TTTUtility Information APPROVAL/STAMP

B36-GGG, B36-TTT specifications

The Blodgett B36-TTT and B36-GGG are two models from Blodgett, a renowned name in commercial cooking equipment known for their innovative and durable products. These ovens are designed to cater to the diverse needs of restaurants, bakeries, and catering services, providing high-performance solutions that ensure consistent cooking results.

The B36-TTT features triple-deck design with fully steam-combined functionalities, allowing for a combination of convection and steam cooking. This versatility empowers chefs to achieve exceptional crusts on bread while maintaining moisture in delicate dishes. The oven's cooking chamber is constructed with stainless steel, which not only enhances durability but also ensures easy cleaning and maintenance.

On the other hand, the B36-GGG model incorporates the same robust build and cooking capabilities, but stands out with its gas-powered features. This model is particularly favored for its energy efficiency and the ability to reach high temperatures quickly, which is essential for high-demand environments. The B36-GGG is engineered with precise temperature controls and adjustable air flow, allowing chefs to fine-tune the cooking process for various menu items.

Both models boast a user-friendly controls interface which simplifies operation, making it accessible for kitchen staff of varying skill levels. They also include large viewing windows that allow for easy monitoring of the cooking process without opening the doors, thus maintaining temperature and energy efficiency.

In terms of capacity, the B36-TTT and B36-GGG are designed to handle a large volume of food, making them ideal for busy kitchens. With multiple racks available, users can cook several dishes at once, saving both time and energy.

Safety is also a key feature in both models, equipped with safety lock mechanisms and accurate temperature gauges. The durable design ensures longevity under heavy use, which is crucial for commercial kitchens where equipment is subjected to high demands.

In summary, the Blodgett B36-TTT and B36-GGG ovens combine cutting-edge technology with practical features, catering to professionals who require precision, efficiency, and reliability. Whether utilizing steam, gas, or a combination of cooking methods, these ovens are engineered to elevate culinary creations to the next level, satisfying both chefs and patrons alike.