Westinghouse GHP95W, GHP95S, GHP795S Electrical Connection 220-240 volts, Use of Hose Assemblies

Page 13

ELECTRICAL CONNECTION (220-240 volts)

Figure 10

Hex nut assembly, fully screwed down

Hex nut assembly, removed from regulator and insert disassembled

Insert oriented for natural gas operation

The appliance is supplied with a standard 7.5Amp service cord terminated by a 3-pin plug for connection to a standard household socket. The electrical supply is required to power the electronic ignition system. NOTE: It will be necessary for servicing purposes to disconnect the electrical power supply. The power point should therefore be accessible after the appliance is installed, as specified in the local wiring regulations.

Diagram 1 is a schematic of the wiring in the appliance. The weight of the unit is printed on the appliance packaging label.

Diagram 1

E

N

L

Insert oriented for LPG operation

Use of Hose Assemblies

ensure that the hose assembly is restrained from accidental contact with the flue outlet of an underbench oven or any other hot surface of an adjacent appliance.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GAS Cooktops Contents Environmental Tips Important safety instructionsElectronic ignition InstallationEnsure the appliance is off and cool before cleaning Enamel Cleaning & CarePots and pans Stainless steelTroubleshooting This appliance must be earthed Installation InstructionsOptional Barrier Installation ProcedureFailure to fix the cooktop to the bench could result Hob 60cm models SealGAS Connection GAS ConnectionSealing washer Is maintained Outlet pressure It should be replaced12.1 10.7 14.4 13.0Use of Hose Assemblies Electrical Connection 220-240 voltsObserve the flame appearance on each burner Testing Appliance OperationWarranty Period WarrantyAustralia For more information on all Westinghouse appliances
Top Page Image Contents