Microwave Drawer ®
Installation Manual
SPECIAL WARNING
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Clearances and Dimensions
For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated clearances and dimensions on pages 2 and 3. See Figure 1 (for 24") or Figures 3 and 4 (for 30") .
Unpacking your microwave drawer
Important notes to the Consumer
•Remove all packing materials from inside theMicrowaveDrawer.
DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the top of the Microwave Drawer.
Sealing surface
Waveguide cover
Keep this manual with your Operation Manual for future reference.
•As when using any microwave oven generating heat, there are certain safety precautions you should follow. These are listed in the Operation Manual. Read all and follow carefully.
•Be sure your Microwave Drawer is installed and grounded properly by a qualified installer or service technician.
Important Safety Instructions
• Remove the feature sticker, if there is one.
Check the drawer for any damage, such as
misaligned or bent
drawer, damaged drawer seals and sealing surfaces, broken or loose Microwave Drawer guides and dents inside the cavity or on the front side of the drawer. If there is any damage, do not operate the Microwave Drawer and contact your dealer or a SHARP AUTHORIZED SERVICER.
Important notes to the installer
•Read all of the Installation Manual before installing the Microwave Drawer.
•Remove all packing material before connecting the electrical supply.
•Observe all governing codes and ordinances.
•Be sure to leave these instructions with the consumer.
If the information in this manual is not followed exactly, a fire or electrical shock may result that could cause property damage, personal injury or death.
To reduce the risk of tipping, the Microwave Drawer must be secured by a properly installed
•This Microwave Drawer must be electrically grounded in accordance with local codes.
•Make sure the wall coverings and the cabinets around the
Microwave Drawer can withstand the heat generated by the Microwave Drawer.
Never leave children alone or unattended in the area where a Microwave Drawer is in use. Never leave the drawer open when the microwave is unattended.
Stepping, leaning or sitting on the drawer may result in serious injuries and can also cause damage to the Microwave Drawer.
•Do not use the Microwave Drawer as a storage space. This creates a potentially hazardous situation.
•Check that the
Stop/Clear to prevent unintended use.
E 1 | TINSK B147MRR1 |
|