Stanley Black & Decker BR67 manual PRE-OPERATION Procedures, Operation Procedures

Page 11

OPERATION

The recommended hose size is .500 inch/12 mm I.D. up to 50 ft/15 m long and .625 inch/16 mm I.D. minimum up to 100 ft/30 m.

PRE-OPERATION PROCEDURES

CHECK POWER SOURCE

1.Using a calibrated flow meter and pressure gauge, check that the hydraulic power source develops a flow of 7-9 gpm/26-34 lpm at 1500-2000 psi/105-

140 bar.

2.Make certain the hydraulic power source is equipped with a relief valve set to open at 2100-2250 psi/145- 155 bar maximum.

INSTALL TOOL BIT

1.Rotate the latch on the breaker foot downward (pointing away from the tool).

2.Insert the tool bit into the foot and pull the latch up to lock the tool bit in place.

CONNECT HOSES

1.Wipe all hose couplers with a clean, lint-free cloth before making connections.

2.Connect the hoses from the hydraulic power source to the tool fittings or quick disconnects. It is a good practice to connect return hoses first and discon- nect them last to minimize or avoid trapped pressure within the tool.

3.Observe flow indicators stamped on hose couplers to ensure that fluid flow is in the proper direction.

The female coupler on the tool hose is the inlet cou- pler.

4.Move the hydraulic circuit control valve to the ON position to operate the tool.

NOTE:

If uncoupled hoses are left in the sun, pressure in- crease within the hoses may make them difficult to connect. When possible, connect the free ends of the hoses together.

OPERATION PROCEDURES

1.Observe all safety precautions.

2.Install the appropriate tool bit for the job.

3.Place the bit firmly on the surface to be broken.

4.Squeeze the trigger to start the breaker. Adequate down pressure is very important. When the tool bit breaks through the obstruction or becomes bound, release the trigger and reposition the tool bit.

NOTE:

Partially depressing the trigger allows the tool to run at slow speed. Slow-speed operation permits easier starting of the tool bit into the work surface.

5.To start, break an opening (hole) in the center of the surface. After making a hole, break portions of the material into the original opening. For best produc- tivity, the breaking should be done around the origi- nal hole.

The size of the broken material will vary with the strength and thickness of the base material and the amount of any reinforcement wire or rebar.

Harder material or more reinforcing wire or rebar will require taking smaller bites. To determine the most effective bite, start with 2 in. / 50 mm or smaller bites.

Bites can then be gradually increased until the bro- ken piece becomes too large, requiring increased time to break off the piece.

Sticking of the tool bit occurs when too large a bite is being taken and the tool bit hammers into the mate- rial without the material fracturing. This causes the tool bit to become trapped in the surrounding mate- rial.

COLD WEATHER OPERATION

If the breaker is to be used during cold weather, preheat the hydraulic fluid at low engine speed. When using the normally recommended fluid, fluid temperature should be at or above 50 °F/10 °C (400 ssu/82 centistokes) be- fore use.

Damage to the hydraulic system or breaker can result from use with fluid that is too viscous or thick.

BR67 User Manual ◄ 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hydraulic Breaker Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions Safety Precautions BR67 Breaker Tool Stickers & TagsHose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsCold Weather Operation PRE-OPERATION ProceduresOperation Procedures OperationTool Protection & Care Problem Cause Remedy TroubleshootingAccumulator Charging Accumulator Testing ProcedureCharging the Accumulator Charging the Accumulator BR67 Sound and Vibration Declaration Specifications8 IN. HEX ⋅ 6 IN. Shank AccessoriesPage Retaining Ring BR67 ANTI-VIBRATION Handle Parts List BR67 ANTI-VIB Parts ListPage BR67 Standard Parts List Valve CAP Assy Underwater Models only Underwater Tools Depth Guideline

BR67 specifications

The Stanley Black & Decker BR67 is a cutting-edge tool that exemplifies the company's commitment to innovation and performance in the power tool industry. This robust and versatile tool is designed for both professionals and DIY enthusiasts, providing unmatched reliability for various applications.

One of the most notable features of the BR67 is its powerful motor, which delivers consistent performance across tough jobs. This motor can provide sufficient torque for a range of applications, whether you are working on woodworking, metalworking, or construction tasks. With its impressive power output, users can expect efficiency and speed, ensuring jobs get completed on time.

The BR67 also incorporates advanced technology aimed at improving user experience. Its ergonomic design ensures that it is comfortable to handle, allowing for prolonged use without causing fatigue. The handle is designed to provide a secure grip, reducing the risk of slippage during operation. This design feature is crucial for maintaining precision and control, especially in intricate projects.

One of the standout characteristics of the BR67 is its versatility. Equipped with various settings and modes, it can adapt to different materials and applications easily. Whether you need to drill holes, drive screws, or undertake more complex tasks, this tool can adjust to meet the demands of each project. This adaptability makes it an excellent choice for professionals who require a multi-functional tool.

Moreover, the BR67 boasts a robust build quality, ensuring durability for extended usage. The materials used in its construction are designed to withstand wear and tear, making it suitable for demanding environments. Additionally, this tool's maintenance-free design means less time spent on upkeep, allowing users to focus on their work.

In terms of safety, the BR67 is equipped with multiple protective features, including overload protection and an integrated safety switch. These elements help to minimize risks associated with power tools, making it a safer option for users.

Overall, the Stanley Black & Decker BR67 presents a powerful combination of performance, versatility, and user-friendly features. Its engineering reflects the brand's reputation for producing high-quality tools that meet the needs of various professionals and enthusiasts. Whether in a workshop or at a job site, the BR67 is an invaluable asset that enhances productivity and encourages precision in every task.
Top Page Image Contents