Engine Oil Replacement, Air Filter | Multiquip MVH-402DSB instruction

MVH-402DSB — MAINTENANCE

Engine Oil Replacement:

1.Replace engine oil, first in 25 hours of operation and every 50 to 100 hours afterwards.

2.Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's Manual).

Air Filter

1.The air filter element should be cleaned because a clogged air cleaner can cause poor engine starting, lack of power and shorten engine life substantially.

Figure 18. Engine Air Filter and Element

2.To clean or replace air filter loosen the wing nut on the air filter housing (Figure 18), remove the cover and take out air filter cartridge. If only cleaning of the air filter is desired blow through the air filter cartridge from the inside, moving a jet of dry compressed air up and down until all dust is removed.

CAUTION

NEVER attempt to check the V-belt with the engine running. Severe injury can occur if your hand gets caughtbetweentheV-beltandtheclutch(Figure19). Always use safety gloves.

CLUTCH

PULLEY

Figure 20. V-Belt Check

zReplacing the V-belt

Remove the belt cover. Engage an offset wrench (19 mm) or the like to vibrator pulley (lower) fastening bolt. Engage waste cloth or the like at midway of V-belt on the left side and while pulling it back strongly, rotate the offset wrench clockwise so that the V- belt will come off.

zReinstalling the V-belt

Engage V-belt to lower vibrator pulley and push the V-belt to left side of upper clutch and, in the same manner as in removal, rotate offset wrench clockwise so that the V-belt goes back on.

zChecking Clutch

Check the clutch simultaneously with V-belt checking. With belt cover removed, check outer drum of the clutch for seizure and "V" groove for wear or damage with your eyes. Clean the "V" groove as necessary. Wear of lining or shoe should be checked with running check. If the shoe is worn, power transmission becomes deficient and slipping will result.

zReplacing Clutch

Remove V-belt. Remove bolt at engine power output by giving a shock to an engaged wrench (tapping with hammer or the like) and rotating bolt counterclockwise. Remove clutch with a pulley extractor.To reinstall, reverse the procedure.

VIBRATOR

PULLEY

Figure 19. V-Belt Hazard

Checking and Replacing the V-Belt and Clutch

1.After 200 hours of operation, remove the belt cover to check the V-belt tension (Figure 20). Tension is proper if the belt bends about 10 mm when depressed strongly with finger between shafts. Loose or worn V-belts reduces power transmission efficiency, causing weak compaction and reduces the life of the belt itself.

CAUTION

Wheneverthecompactor'svibrationbecomesweak or lost during normal operation regardless of opera- tion hours, check the V-belt and clutch immediately.

MQ-MIKASA MVH-402DSB PLATE COMPACTOR — PARTS & OPERATION MANUAL — REV. #2 (03/30/05) — PAGE 21

MVH-402DSB specifications

The Multiquip MVH-402DSB is a state-of-the-art compactor designed for heavy-duty performance and versatility in various construction and landscaping applications. This model stands out due to its powerful engine and advanced features, making it an excellent choice for contractors who require efficiency and reliability in their equipment.

At the heart of the MVH-402DSB is a robust Honda GX160 engine, generating an impressive output of 5.5 horsepower. This reliable engine provides ample power for efficient compaction of soil, asphalt, and aggregate materials, ensuring optimal performance in both small and large projects. With a heavy-duty centrifugal clutch, the compactor delivers superior control and easy operation, allowing operators to focus on their work without worrying about engine performance.

One of the key technologies incorporated in the MVH-402DSB is its unique exciter system. This system produces a high-frequency vibration that effectively compacts materials, resulting in a dense, stable surface. The machine's large, heavy base plate, measuring 20 inches wide and 25 inches long, enhances stability and traction during operation. This design enables the MVH-402DSB to work efficiently on a variety of terrains, from uneven ground to asphalt surfaces.

The Multiquip MVH-402DSB also features an ergonomic handle that can be adjusted to multiple positions, allowing for comfortable operation and enhanced maneuverability. This adjustable handle design minimizes user fatigue and ensures the operator can maintain optimal control during use. Additionally, the compactor is equipped with a built-in wheel kit, which makes transporting the machine to different job sites easy and convenient.

Durability is another hallmark of the MVH-402DSB. Constructed with high-quality materials, including heavy-gauge steel for the base plate and housing, this machine is built to withstand the rigors of daily use. The protective cover ensures that vital components are shielded from dirt and debris, further extending the lifespan of the equipment.

Overall, the Multiquip MVH-402DSB offers exceptional performance, reliability, and user-friendly features, making it an ideal choice for professionals looking to achieve high-quality compaction results efficiently. Whether it’s for construction, landscaping, or maintenance tasks, this compactor delivers the power and agility needed to get the job done right.