Multiquip manual QP3TE Refueling, Plastic TRUCK-BED Liner

QP3TE — REFUELING

DANGER

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the

engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry. If pump is placed in a truck bed with a plastic liner, REMOVE pump from truck bed and place on ground (Figure 3) to refuel. The possibility of fire or explosion exists, due to static electricity.

PLASTIC

TRUCK-BED

LINER

DANGER

DO NOT ADD FUEL

TO TRASH PUMP IF

TRASH PUMP IS PLACED

INSIDE TRUCK-BED WITH

PLASTIC LINER. POSSIBILITY EXISTS

OF EXPLOSION OR FIRE DUE TO

STATIC ELECTRICITY.

Figure 3. Pump Refueling

PAGE 14 — QP3TE TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #4 (11/15/10)