Multiquip MVC-90H manual Fuel Safety

Page 9

FUEL SAFETY

DANGER

„DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity.

FUEL

FUEL

„DO NOT start the engine near spilled fuel or combustible fluids. Diesel fuel is extremely flammable and its vapors can cause an explosion if ignited.

„ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

„ALWAYS use extreme caution when working with flammable liquids.

„DO NOT fill the fuel tank while the engine is running or hot.

„DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system.

„Store fuel in appropriate containers, in well-ventilated areas and away from sparks and flames.

„NEVER use fuel as a cleaning agent.

„DO NOT smoke around or near the

equipment. Fire or explosion could result from fuel vapors or if fuel is spilled on a hot engine.

SAFETY INFORMATION

BATTERY SAFETY (ELECTRIC START ONLY)

DANGER

„DO NOT drop the battery. There is a possibility that the battery will explode.

„DO NOT expose the battery to open flames, sparks, cigarettes, etc.The battery contains combustible gases and liquids. If these

gases and liquids come into contact with a flame or spark, an explosion could occur.

WARNING

„ALWAYS wear safety glasses when handling the battery to avoid eye irritation. The battery contains acids that can cause injury to the eyes and skin.

„Use well-insulated gloves when picking up the battery.

„ALWAYS keep the battery charged. If the battery is not charged, combustible gas will build up.

„DO NOT charge battery if frozen. Battery can explode. When frozen, warm the battery to at least 61°F (16°C).

„ALWAYS recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of combustible gases.

„ If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

„If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and contact the nearest doctor or hospital to seek medical attention.

CAUTION

„ALWAYS disconnect the NEGATIVE battery terminal before performing service on the equipment.

„ALWAYS keep battery cables in good working condition. Repair or replace all worn cables.

MVC-90H PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #3 (01/10/11)— PAGE 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model MVC-90H Proposition 65WARNING Page Table of Contents Ordering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationGeneral Safety Compactor Safety Fuel Safety Transporting Safety Page Description MVC-90H Plate Compactor DimensionsDry Weight DisplacementDimensions L x W x H ModelMVC-90H Plate Compactor General Information Vibrating Plate a flat, open plate made of durable Counter weightsVibration Case Encloses the eccentric, gears Splash plateMVC-90HPLATECOMPACTOR-COMPONENTSHONDAENGINE Operating the engine without anMuffler Used to reduce noise and emissions Engine Oil Check MVC-90H Plate Compactor InspectionFuel Check MVC-90H Plate Compactor InspectionVibrator Oil Check Motor oilMVC-90H Plate Compactor START-UP Procedure Starting the Engine Honda engineDo not pull the starter rope all the way to the end Place the EngineON/OFFswitch in theOFF position MVC-90H Plate Compactor SHUT-DOWN ProcedureStopping the Engine Emergency Shutdown ProucedureUsing the Compactor Sprinkler System To rectify this problem, consider the followingMVC-90H Plate Compactor Operation OperationMaintenance MVC-90H Plate Compactor MaintenanceInspection and Maintenance ServiceTables Daily ServiceEngine Oil Replacement MVC-90H Plate Compactor MaintenanceChanging Vibrator Oil Tip the compactor to drain the oilReplacing the V-belt Clean the V groove as necessaryChecking the Clutch Replacing the ClutchCompactor Storage MVC-90HPLATECOMPACTOR-PREPARATIONFORLONG-TERMSTORAGEEngine Troubleshooting MVC-90H Plate Compactor -TROUBLESHOOTING EngineAir cleaner not clean? MVC-90H Plate Compactor -TROUBLESHOOTING Plate Compactor Page QTY. Column MVC-90H Explanation of Parts Section Remarks ColumnBELT, A33 MVC-90H Plate Compactor Suggested Spare PartsName Plate and Decals MVC-90H Plate Compactor Name Plate and DecalsMVC-90H Plate Compactor Name Plate and Decals MVC-90H Plate Compactor Body Assy 930405011 402100430959404350 402010010MVC-90H Plate Compactor Body Assy 954403241 402010110402010040 956300060MVC-90H Plate Compactor -VIBRATOR Assy 401301260 408010050401301270 401010190MVC-90H Plate Compactor Clutch ASSY. Oldtype MVC-90H Plate Compactor Clutch ASSY. Oldtype MVC-90H Plate Compactor Clutch ASSY. Newtype 943020030 943040050943030030 943050080Honda GX160K1QMX2/GX160U1QMX2 ENG.- AIR Cleaner Dual Assy ELEMENT, AIR Cleaner Dual AIR Cleaner Dual AssyCOVER, AIR Cleaner Dual GROMMET, AIR CleanerHonda GX160K1QMX2/GX160U1QMX2 ENG. Camshaft Assy Camshaft Assy SPRING, Weight ReturnROD, Push ARM, Vlave RockerHonda GX160K1QMX2/GX160U1QMX2 ENG. Carburetor Assy Carburetor Assy PLATE, Lever SettingGasket SET Valve SET, FloatHonda GX160K1QMX2/GX160U1QMX2 ENG. Control Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Control Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Crankcase Cover Assy GASKET, Case Cover Crankcase Cover AssyCAP, OIL Filler GASKET, OIL Filler CAPHonda GX160K1QMX2/GX160U1QMX2 ENG. Crankshaft Assy Crankshaft Assy Crankshaft Q-TYPEWASHER, 8 MM HONDAGX160K1QMX2/GX160U1QMX2ENG.-CYLINDERBARRELASSY WEIGHT, Governor Switch ASSY., OIL LevelHOLDER, Governor Weight SLIDER, GovernorHonda GX160K1QMX2/GX160U1QMX2 ENG. Cylinder Head Assy CLIP, Valve Guide GUIDE, Valve OS OptionalGASKET, Cylinder Head COVER, HeadHonda GX160K1QMX2/GX160U1QMX2 ENG. FAN Cover Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. FAN Cover Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Flywheel Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Flywheel Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Fueltank Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Fueltank Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Ignition Coil Assy WIRE, Stop Switch 370MM Ignition Coil AssyCoil ASSY., Ignition Honda GX160K1QMX2/GX160U1QMX2 ENG. Muffler Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Muffler Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Piston Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Piston Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Recoil Starter Assy Recoil Starter Assy SCREW, SettingREEL, Recoil Starter RATCHET, StarterHonda GX160K1QMX2/GX160U1QMX2 ENG. Gasket KIT Assy Gasket KIT Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Labels Assy Honda GX160K1QMX2/GX160U1QMX2 ENG. Labels Assy Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help
Related manuals
Manual 80 pages 12.07 Kb

MVC-90H specifications

The Multiquip MVC-90H is a powerful, efficient, and versatile compactor that stands out in the construction and landscaping industries. This machine is designed to tackle various soil types, making it an excellent choice for compacting asphalt, gravel, and other materials in a range of applications.

One of the most notable features of the MVC-90H is its robust Honda engine. This reliable engine delivers unmatched performance, ensuring that the compactor operates at optimal levels even in demanding conditions. The combustion engine not only provides abundant power but also ensures low emissions, aligning with contemporary environmental standards.

The MVC-90H utilizes a unique centrifugal clutch cutting mechanism that allows smooth operation and consistent performance. This technology ensures that the vibratory plate remains in constant contact with the ground, maximizing efficiency during the compaction process. The heavy-duty design of the machine contributes to its durability and reliability on job sites, ensuring it can withstand the rigors of everyday use.

Another significant characteristic of the MVC-90H is its user-friendly design. It features adjustable handles that can be set to various heights to accommodate operators of different sizes, providing comfort and reducing operator fatigue. Additionally, the compactor’s compact size and lightweight construction make it easy to transport to and from job sites without the need for heavy-duty equipment.

The machine is also equipped with a high-frequency vibration system that enhances the effectiveness of compaction. This high-frequency technology allows for better penetration of soil, resulting in a denser and more stable ground. It is particularly useful in areas where precision in compaction is critical, such as in trench backfilling or base preparation for paving.

Furthermore, the MVC-90H is designed with an integrated water tank system that helps prevent asphalt from sticking to the plate during operation. This feature increases operational efficiency and reduces downtime, allowing operators to complete their tasks more swiftly.

In summary, the Multiquip MVC-90H is a well-rounded compactor that combines powerful performance with user-friendly features. Its robust Honda engine, advanced compaction technologies, and practical design make it an ideal choice for professionals seeking reliability, efficiency, and ease of use on their projects. Whether for commercial construction or landscaping tasks, the MVC-90H proves to be a valuable asset in any contractor's toolkit.
Top Page Image Contents