SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, press |
| 2. To set the 24 hour clock, press |
| |
the INFO/CLOCK button |
| the INFO/CLOCK button 3 |
| |
twice, as shown: | x2 | times, as shown: | x3 | |
|
|
| ||
Example: |
|
|
|
|
To set the 24 hour clock to 23:35: |
|
|
|
|
1. Choose the 24 hour clock by | 2. Set the hours. Rotate the TIME/ | 3. Change from hours to |
| |
pressing the INFO/CLOCK | WEIGHT dial clockwise until the | minutes by pressing the | ||
button 3 times. | correct hour is displayed. | INFO/CLOCK button once. |
x3 |
| x1 |
4. Set the minutes. | 5. Start the clock. | Check the display. |
| x1 |
|
NOTES:
1.You can rotate the TIME/WEIGHT dial clockwise or counter clockwise.
2.Press the STOP button if you make a mistake during programming.
3.If the oven is in cooking mode and you wish to know the time of day, touch the INFO/CLOCK button. As long as your finger is touching the button, the time of day will be displayed.
4.If the electrical power supply to your microwave oven is interrupted, plug in the oven again, then open and close the door. The display will show:
“ENERGY SAVE MODE TO GO OUT OF
ENERGY SAVE MODE SET CLOCK”.
If this occurs during cooking, the programme will be erased. The time of day will also be erased.
5.When you want to reset the time of day, follow the above example again.
6.If you do not set the clock, press the STOP button once. “.0” will appear on the display. When the operation of the oven is finished, “.0” will reappear on the display instead of the time of day.
7.If you set the clock, energy save mode does not work.
MICROWAVE POWER LEVELS
Your oven has 5 power levels. To choose the power level, follow the advice given in the recipe section.
900 WATT = 100 % output | 270 WATT = 30 % output |
630 WATT = 70 % output | 90 WATT = 10 % output |
450 WATT = 50 % output |
|
•To select Microwaving, rotate the COOKING MODE dial to the MICROWAVE setting.
•Select the desired microwave power setting by pressing the MICROWAVE POWER LEVEL button.
• If the MICROWAVE POWER LEVEL button is pressed once, |
| (100 %) will be displayed. |
If you miss your desired level, continue pressing the MICROWAVE POWER LEVEL button until you reach the level again.
•If the level is not selected, the level 900 W (100 %) is automatically set.
ENGLISH
9