Rotel RSX-1055 Other Options Menu, Default Setup Menu, To restore the Factory Default set

Page 33

OTHER OPTIONS Menu

OTHER OPTIONS

RECORD: CD

DYNAMIC: Max

MULTI INPUT: Off

CINEMA EQ: Off

POWER: Direct

OSD: On

LANGUAGE: ENGLISH

ENT

KEY=MAIN MENU

UP KEY=up

+/–

KEY=change

DWN KEY=down

This menu, accessed from the MAIN menu, provides access to a several miscellaneous settings as follows:

RECORD: Select a signal for the record out- puts by choosing one of the input sources.

DYNAMIC: steps through the three dynamic range settings available in digital modes:

•MAX (no compression/full dynamic range)

•MID (moderate compression)

•MIN (full compression/minimum dynamic range).

MULTI INPUT: determines whether the MULTI channel input is turned ON or OFF.

CINEMA EQ: determines if a special equal- ization setting is turned ON or OFF. This equal- ization may be desirable for playback of movie source material to compensate for the acous- tic differences between a commercial cinema and a home theater environment. The CIN- EMA EQ setting can also be changed using the FILTER button on the remote.

POWER: This setting determines how the RSX-1055 powers up. With the default DIRECT setting, the unit is fully activated when AC power is applied and the front-panel POWER button is pressed in; however, it may be put in STANDBY mode using the remote POWER button. With the STANDBY setting, the unit pow- ers up in standby mode when AC is applied and the front-panel POWER button is in the ON position. The unit must be activated us- ing the remote control POWER button. In AL- WAYS-ON mode, the unit remains fully active whenever AC is present and the front-panel POWER button is pressed in; the remote POWER button is disabled and the unit can- not be put in standby mode.

33

OSD: Determines whether the ON-SCREEN DISPLAYS are shown on your TV monitor dur- ing operation.

LANGUAGE: Selects a language for all of the ON-SCREEN MENUS.

Change settings on the OTHER OPTIONS menu by highlighting the desired line using the UP/ DOWN buttons and using the +/– buttons to step through the available settings. To return to the MAIN menu, press the ENTER button. Press the MENU key on the remote to cancel the display and return to normal operation.

DEFAULT SETUP Menu

DEFAULT SETUP

TUNER SETTING: N. AMERICA

REDIRECT: FRONT

FACTORY DEFAULT: No

USER DEFAULT: No

USER DEFAULT SET: No

ENT

KEY=MAIN MENU

UP KEY=up

+/–

KEY=change

DWN KEY=down

DEFAULT SETUP

TUNER SETTING: N. AMERICA

REDIRECT: FRONT

FACTORY DEFAULT: Yes

USER DEFAULT: No

USER DEFAULT SET: No

ENT KEY=Exec.

UP KEY=up

+/– KEY=change

DWN KEY=down

The DEFAULT SETUP menu provides access to five functions:

•Restoring all features and settings to the original FACTORY DEFAULT settings.

•Changing the tuning functions and displays for use in North America or Europe.

•Specifies whether the front left and front right internal amplifier channels are used to power front speaker (default setting) or center back speakers.

•Memorizing a custom group of settings as a USER DEFAULT.

•Activating the USER DEFAULT settings.

English

To restore the FACTORY DEFAULT set-

tings: Place the highlight on the FACTORY DEFAULT line using the UP/DOWN buttons and use the +/– buttons to change the setting to YES. The screen will change to a confirma- tion screen. Press the ENTER button to proceed with resetting the FACTORY DEFAULT settings. The unit will power off and then on, with the factory settings restored. To return to the MAIN menu without resetting the FACTORY DEFAULT settings, change the entry to NO and press the ENTER button.

NOTE: Resetting to factory default settings will erase all stored settings including delay set- tings, speaker settings, balance settings, in- put settings and more. You will lose ALL system configuration settings. Be certain that you wish to do so before resetting the factory defaults.

To change the TUNER setting: Place the highlight on the TUNER SETTING line using the UP/DOWN buttons and use the +/– but- tons to change the setting to N. AMERICA or EUROPE. Then, move the highlight to the FAC- TORY DEFAULT line and change the setting to YES as described above. The screen will change to a confirmation screen. Press the EN- TER button to proceed with resetting the FAC- TORY DEFAULT settings and changing the TUNER SETTING. To return to the MAIN menu without resetting the FACTORY DEFAULT and TUNER settings, change the entry to NO and press the ENTER button.

NOTE: Changing the default TUNER SETTING can only done at the same time as restoring the FACTORY DEFAULT settings. Therefore, we recommend selecting your default TUNER SETTING and resetting to the FACTORY DE- FAULT settings as the first step in configuring the unit, before you change or memorize any other configuration settings.

To change the REDIRECT setting: Place the highlight on the REDIRECT line using the UP/DOWN buttons and use the +/– buttons to change the setting to FRONT SP (for pow- ering front speakers) or CB SP (for powering center back speakers. If you use the internal amplifiers to power center back speakers, then you will need a separate stereo amplifier to power your front speakers.

Page 32 Page 34
Image 33
Page 32 Page 34
Contents RSX-1055 FCC Information Important Safety Instructions Controls and Connections RSX-1055Surround Sound ReceiverRR-969 Remote Power VOLSubwoofer Left Front Center OutputsRotel RSX-1055 Source ConnectionsZone 2 Connections RSX-1055 Surround Sound ReceiverAntenna On-Screen Display Menus Contents About Rotel Key FeaturesBasic Controls Input Controls REC Button Zone Button Overview Surround FormatsMulti Input Dolby Surround Dolby Pro LogicDSP Digital Signal Processing DTS 7.1 SurroundOther Formats Automatic Surround Modes Surround ControlsManually Selecting Surround Modes 2CH ButtonSpeaker Level Adjustment Selection Buttons UP/DOWN Buttons Setting Surround Modes from the Remote SUR+ ButtonDTS Neo6 Button DSP ButtonTuner Controls Direct Button Preset ButtonMono Button Display ButtonTP Button PTY ButtonTA Button Video ConnectionsTape Inputs and Outputs CD InputsVideo 1-5 Audio Inputs Composite Video InputsVideo 1-3 Audio Outputs Multi InputsComposite Video Outputs Video 1-3 S-Video OutputsTV Monitor Output Antenna ConnectionsSpeaker Outputs Preamp OutputsFM Antenna AM AntennaAC Input 12V Trigger ConnectionsControlling Zone 2 from the Main Room Zone Button Zone 2 Power On/Off OperationControlling Zone 2 from the Remote Location Zone 2 Audio OutputsIR OUT Jacks Zone REM in JackNavigation Buttons DOWN/UP Buttons To move upInput Menu System Status Menu Main MenuSpeaker Setup Menu Dolby Pro Logic II surround modeDTS Neo6 Sub-Menu Dolby PRO Logic II Sub-Menu Center Speakers small/large Surround Speakers small/largeCenter Back Speakers small Test Tone Menu Delay Setup MenuCB Spkr Select 1 speaker/2 speak Calibration with an SPL meterTone Setup Menu Subwoofer Setup MenuDefault Setup Menu To restore the Factory Default setOther Options Menu To activate memorized User Default Zone 2 Setup MenuSpecifications Rotel of America Rotel EuropeRotel Deutschland
Related manuals
Manual 88 pages 55.16 Kb

RSX-1055 specifications

The Rotel RSX-1055 is a high-performance home theater receiver that seamlessly integrates advanced technology with user-friendly features to deliver an exceptional audio and visual experience. Designed for audiophiles and home theater enthusiasts alike, it offers a robust platform for both music and movie lovers to enjoy their media in high fidelity.

One of the standout features of the RSX-1055 is its amplification system. The receiver delivers a powerful output of 100 watts per channel across all seven channels, providing ample power to drive a variety of speakers. This ensures that the audio is clear and dynamic, whether you are listening to music or watching action-packed movies. The use of Rotel's proprietary Class AB amplification technology results in lower distortion levels and greater efficiency, allowing for a more accurate sound reproduction.

The RSX-1055 boasts impressive surround sound processing capabilities, supporting various formats, including Dolby Digital and DTS. This enables users to enjoy immersive soundscapes that draw them into the action, making it an excellent choice for both movie nights and gaming sessions. The advanced digital signal processing (DSP) component ensures that the audio is not only powerful but also well-balanced and rich, enhancing the overall listening experience.

Connectivity is another strong point of the RSX-1055. It features multiple HDMI inputs, allowing for high-definition video and audio pass-through. Additionally, there are composite, component, and S-video inputs for older devices, making it versatile for various system setups. The receiver also includes an integrated tuner for AM/FM radio, giving users access to their favorite stations without the need for additional equipment.

The user interface of the RSX-1055 is straightforward, featuring a clear on-screen display and an intuitive remote control that allows for easy navigation through settings and inputs. The ability to customize settings further enhances the user experience, letting users tailor the audio output to fit their specific home environment.

In terms of build quality, the RSX-1055 reflects Rotel's commitment to craft and durability. With a solid chassis and high-quality internal components, this receiver is designed to deliver consistent performance over time.

In conclusion, the Rotel RSX-1055 is a versatile and powerful home theater receiver that combines robust amplification, advanced surround sound processing, and comprehensive connectivity options. Its user-friendly design and high-quality construction make it an ideal choice for anyone looking to elevate their home audio experience.
Top Page Image Contents