Sharp KB-6524P Microwave Drawer cooking, Time Cooking, To SET Power Level, Sensor Settings

TIME COOKING

Your Microwave Drawer can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros.

• Suppose you want to cook for 5 minutes at 100%.

1 Enter cooking time 500.
				5.00	TOUCH	START
OR	TOUCH	POWER	LEVEL

2 To cook at 100% power (High), touch Start/Minute Plus pad.

TO SET POWER LEVEL

There are eleven preset power levels.

Using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow cooking of meats. Consult a microwave cookbook or recipes for specific recommendations.

•Suppose you want to defrost for 5 minutes at 30%.

1 Enter defrost time 5 0 0. 5.00

2 Touch Power Level pad 8 times.

3 Touch Start/Minute Plus pad.

TOUCH POWER	Approximate	COMMON
LEVEL PAD	Percentage	WORDS
NUMBER OF	of Power	FOR POWER
TIMES FOR		LEVELS
DESIRED POWER
Power Level x 1	100%	High
Power Level x 2	90%
Power Level x 3	80%
Power Level x 4	70%	Medium High
Power Level x 5	60%
Power Level x 6	50%	Medium
Power Level x 7	40%
Power Level x 8	30%	Med Low/Defrost
Power Level x 9	20%
Power Level x 10	10%	Low
Power Level x 11	0%

Microwave Drawer cooking

Sensor Settings

Sharp's Sensor is a semi-conductor device that detects the vapor (moisture and humidity) emitted from the food as it heats. The sensor adjusts the cooking times and power levels for various foods and quantities.

Using Sensor Settings:

1After the Microwave Drawer is plugged in, wait 2 minutes before using any sensor setting.

2Be sure the exterior of the cooking container and the interior of the Microwave Drawer are dry. Wipe off any moisture with a dry cloth or paper towel.

3The sensor works with foods at normal storage temperature. For example, popcorn would be at room temperature.

4Any sensor selection can be programmed with More or Less Time Adjustment. See page 17.

5More or less food than the quantity listed in the charts should be cooked following the guidelines in any microwave cookbook.

6During the first part of sensor use, the food name will appear on the display. Do not open the Microwave Drawer or touch Stop/Clear during this part of the cycle. The measurement of vapor will be interrupted. If this occurs, an error message will appear. To continue cooking, touch the Stop/Clear pad and cook manually.

When the sensor detects the vapor emitted from the food, the remainder of cooking/reheating time will appear. The Microwave Drawer may be opened when the remaining time appears on the display. At this time, you may stir or season food, as desired.

7If the sensor does not detect vapor properly when popping popcorn, the oven will turn off, and the time

of day will be displayed. If the sensor does not detect vapor properly when cooking other foods, ERROR will be displayed, and the microwave will turn off.

8Check food temperature after cooking. If additional time is needed, continue to cook manually.

9Each food has a cooking hint. Touch the Custom Help pad when the HELP indicator is lighted in the display.

11