Accton Technology POWER-3004E manual Troubleshooting, Application Diagram

Page 6

Quick Installation Guide

Troubleshooting

Symptom: Power LED does not light after power on.

Cause: Power outlet or power cord may be defective.

Solution: 1. Check for loose connections.

2.Check the power outlet by using it for another device.

3.Replace the power cord.

Symptom: Port LED does not light after connection is made.

Cause: Hub port, network card or cable may be defective.

Solution: 1. Check that the hub and attached device are both powered on.

2.Be sure the network cable is connected to both devices.

3.Verify that Category 5 cable is used for 100Mbps connections and Category 3 or greater for 10Mbps connections. Also verify that the maximum cable length does not exceed 5 meters (16.4 feet) when connecting to a 100Mbps hub, or 100 meters (328 feet) when connecting to any other device.

4.Check the network card and cable connections for defects.

5.Replace the defective card or cable if necessary.

Application Diagram

4

Image 6
Contents CheetaHub Power-3004E Quick Installation Guide Page Introduction Check the PackageSide Panel RJ-45 Connectors Mount the HubConnect PCs to the Hub Cascade Devices to the Hub Verify System OperationLEDs Condition Status Troubleshooting Application DiagramSpecifications Number of Ports RJ-45 portsCertification FCC Class B CertificationSafety Compliance Voltage Cord Set SpecificationsWichtige Sicherheitshinweise German Safety Statement Warranty International Headquarters USA Headquarters

POWER-3004E specifications

Accton Technology POWER-3004E is a state-of-the-art Ethernet switch designed to meet the increasing demands of modern networking environments. This device offers a plethora of features that make it an ideal choice for businesses looking to enhance their network infrastructure.

One of the standout features of the POWER-3004E is its non-blocking architecture, which ensures that all ports can transmit at full speed simultaneously without any loss of performance. This capability is crucial for businesses that rely on real-time data transmission and cannot afford any bottlenecks in their network.

The switch is equipped with four 10 Gigabit SFP+ ports and four 1G SFP ports, allowing for versatile connectivity options. This variety ensures that businesses can easily scale their networks to meet future growth while maintaining compatibility with existing equipment. Moreover, it supports various fiber optics technologies, enabling high-speed connections over long distances, which is a vital asset for organizations with expansive infrastructures.

The POWER-3004E also supports advanced Layer 2 management features. These include VLAN (Virtual Local Area Network) support, which enhances network security by segregating traffic and enabling more efficient bandwidth utilization. Additionally, the device offers link aggregation, which allows multiple connections to be combined for increased throughput and redundancy, further bolstering network resilience.

Security is another critical aspect of the POWER-3004E. It comes with robust 802.1X port-based authentication and supports multiple network protocols, ensuring that only authorized devices can access the network. This feature helps safeguard sensitive data and prevents unauthorized access.

The switch also incorporates energy-efficient technologies that reduce power consumption without sacrificing performance. The POWER-3004E is designed to operate with lower heat generation, contributing to a more sustainable network environment.

Overall, with its advanced features, versatile connectivity options, and emphasis on security and energy efficiency, the Accton Technology POWER-3004E is a powerful solution for businesses looking to optimize their networking capabilities. Its robust performance and reliability make it a valuable addition to any enterprise network.