FoodSaver Vac 550 user manual How To Vacuum Package Using FoodSaver Universal Lids

Page 10

T H E F O O D S AV E R U S E R M A N U A L

How To Vacuum Package Using FoodSaver Universal Lids

 

FoodSaver Universal Lids give you the flexibility of vacuum

 

packaging some foods in their original containers. They work on

 

most metal cans and glass jars. They’re excellent for retaining the

 

freshness of tomato and pasta sauces, coffee, mustards, and toppings.

 

However, vacuum packaged canned foods still must be refrigerated

 

to minimize micro-organism growth. If you are planning to store

 

canned foods for more than a day, transferring foods from the can

 

into a FoodSaver Bag, FoodSaver Canister, a glass, or a hard plastic

 

container is recommended to prevent “off-flavor” from developing

 

from the can.

 

CAUTION: FoodSaver Universal Lids are not to be used with thin

 

glass, crystal, plastic, or aluminum containers. The vacuum

 

force exerted by the Vac 550 is very powerful and could implode

 

a thin glass or a non-rigid container.

1

Place the Vac 550 on a flat, dry surface

 

and plug the power cord into a standard

 

electrical outlet.

2

The universal lid is labeled “Open,”

 

“Vacuum,” and “Closed.” Turn the knob

 

on the universal lid so the arrow points to

 

“Vacuum.”

3

Place the universal lid on top of

 

the open container.

4

Insert one end of the accessory

 

hose into the accessory port

 

on the Vac 550.

5

Insert the other end of

 

the accessory hose into

 

the hole on the top of

 

the universal lid.

T H E F O O D S AV E R U S E R M A N U A L

6Close the lid. Lock the lid by pressing in the locks on both sides.

(You may need to press down lightly on the stars while pressing in the locks.)

7Press and hold down the On button. The light will turn on as

the Vac 550 starts the vacuum cycle and air is removed from the can or jar. Wait until the sound stops

and the light goes off before releasing the lid.

8Turn the knob on the universal lid so the arrow points to “Closed.”

9Vacuum packaging is complete.

IMPORTANT: Remember to remove the accessory hose from the accessory port on the FoodSaver Vac 550 before you vacuum package in FoodSaver Bags.

How to Open the FoodSaver Universal Lid

To open the FoodSaver Universal Lid, turn the knob so the arrow points to “Open.” You should now be able to remove the univer- sal lid from the container.

16

17

Image 10
Contents Vac550 Table of Contents WelcomeAbout Vacuum Packaging FoodSaver VacFoodSaver Bags and Rolls FoodSaver Accessories Roll are at 3 intervals How to Make a Custom-Made Bag with FoodSaver RollsWill assist you in cutting straight Sound stops and the light turns off before releasing the lid Place the lid on top of the canister How to Vacuum Package Using FoodSaver Designer CanistersHow to Open the FoodSaver Designer Canister Stops and the light turns off before releasing the lidHose into the hole on the top How to Open the FoodSaver Bulk Storage or Square CanisterCanister Mason jar. Push down How to Open the Mason JarFirmly until the jar sealer How To Vacuum Package Using FoodSaver Universal Lids How to Remove the FoodSaver Bottle Stopper How to Vacuum Package Using FoodSaver Bottle StoppersBottle stopper Care and Cleaning Instructions Food Preparation and Storage GuideHas the best texture then Preservation method. HoweverMorning because produce Harvesting from a home gardenCorn on cob AsparagusWhole kernel corn Snow peasInto the vacuum pump and helps guarantee a good seal Fudge to send as giftsLeave at least one inch of room Nothing Happens When the On Button Is Pressed Important SafeguardsTroubleshooting Air Is Not Removed From the BagBag Will Not Seal If You Cannot Fix the ProblemBag Melts Mason Jar or FoodSaver Canister Will Not VacuumMarinating Recipes Ingredients neededPork New Orleans Vacuum Packaging Non-Food Items Warranty and Service Information