FoodSaver Accessories

to Open.

FoodSaver Bottle Stoppers

(without large knob on lid)

To release vacuum and open, push gray rubber button on lid.

FoodSaver Bulk Canisters and Quick Marinators (with large knob on lid) and Universal Lids

To release vacuum and open, turn knob on lid

FoodSaver Vacuum Packaging Canisters

FoodSaver Jar Sealer with Mason Jars

Insert Accessory Hose

Press and Release On/Cancel Button

How to Vacuum Package with FoodSaver Accessories

QS.1080_v5 5/10/04 11:26 AM Page 3

Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.

FoodSaver Accessory Guidelines

1.Always leave at least one inch of space between contents and rim.

2.Wipe rim of canister, container or bottle to ensure it is clean and dry.

3.Place lid on canister or container, or place stopper in bottle.

4.For accessories with a large knob on lid, turn knob to Vacuum. Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose.

5.For accessories without a large knob on lid, vacuum package using instructions below.

How to Open FoodSaver Accessories after Vacuum Packaging

1.	Prepare the container according to the FoodSaver	Indicator Lights (D) will turn on in sequence.
	Accessory Guidelines above.	Side locks (F) will automatically release while
2.	Insert one end of Accessory Hose (B) into	motor is running.
	Accessory Port (G) on appliance. Insert other	5. When motor turns off, vacuum process is complete.
	end into port on accessory. Twist gray tab while	6. Gently twist and remove Accessory Hose from
	inserting to ensure a tight fit.	accessory and appliance.
3.	Lock lid by pressing lightly on stars and pulling	Note: For important tips on using accessories with
	side locks (F) forward until they click into place.	Note: For important tips on using accessories with
	side locks (F) forward until they click into place.	different foods, please refer to the FoodSaver	Accessories
4.	To begin vacuum process, press and release	different foods, please refer to the FoodSaver
4.	To begin vacuum process, press and release	Reference Guide.
	On/Cancel Button (C). Motor will start and	Reference Guide.
	On/Cancel Button (C). Motor will start and

For use with Ball® and Kerr ® brand Mason jars.

IMPORTANT: Do NOT use screw bands when vacuum packaging jars. To open, wedge spoon between Mason jar lid and highest part of threaded rim. Twist spoon gently to release vacuum.

To release vacuum and open, twist and pull up on

Bottle Stopper.