FoodSaver Professional III quick start Getting Started, How to Make a Bag from a FoodSaver Roll

Page 2

QS.Pro3_GSturbo_v3 6/29/04 11:22 AM Page 2

Getting Started

Registering your appliance is quick and easy at www.foodsaver.com.

How to Make a Bag from a FoodSaver Roll

Pull Out Bag Material

 

Set Seal Control Switch

Press and Release Manual Seal Button

1.

Open appliance lid and place roll into Roll

5.

When red Indicator Lights stop blinking, bag

 

Storage Compartment (M).

 

 

 

material is sealed. Lid will open slightly.

2.

Pull out enough bag material to hold item to be

6.

To cut bag, slide Bag Cutter (I) from one end of

 

vacuum packaged, plus 3 inches. Close lid.

 

sliding channel to other end.

3.

Turn Seal Control Switch (D) to

 

.

7.

Open lid, remove bag, and tuck roll back

3

4.

Press and release Manual Seal Button (B). Lid will

 

into Roll Storage Compartment before vacuum

 

be pulled down automatically and red Indicator

 

packaging.

 

Lights (C) will turn on, indicating bag material is

Now you are ready to vacuum package with your

 

being sealed.

 

 

new bag (see below).

How to Vacuum Package with FoodSaver Bags

Rolls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Place Bag in Vacuum Channel

Set Seal Control Switch

 

 

Press and Release On/Off Button

1. Place item(s) in bag, allowing at least 3 inches of

5. To begin vacuum process, press and release

&

 

 

 

space between bag contents and top of bag.

 

On/Off Button (F). Motor will start and Indicator

2.

Open appliance lid and place open end of bag

 

Lights (C) will turn on in sequence.

 

 

 

down into Vacuum Channel (J). Make sure roll

6. When motor and Indicator Lights turn off, vacuum

 

material is tucked back into Roll Storage

 

process is complete. Open lid and remove bag.

 

Compartment (M) or it could prevent the appli-

 

Refrigerate or freeze as needed. (See FoodSaver

 

ance from operating properly.

 

 

Reference Guide for food safety tips.)

 

 

3.

Close lid.

 

Tip: The On/Off Button can also be used to cancel

4. Set Seal Control Switch (D) to:

 

 

vacuum process mid-way and open lid.

 

 

 

 

 

or

 

to re-seal non-FoodSaver bags, such as

 

 

 

 

1

2

Note: This appliance features a heavy-duty Sealing

 

Mylar® potato chip bags (shorter seal time).

 

 

 

to vacuum package using FoodSaver bags

Strip (N) that can perform 50 consecutive seals

 

 

3

 

 

without overheating.

Bags

 

(medium seal time).

 

 

 

 

 

 

 

 

 

 

or

 

to vacuum package moist or juicy foods

 

 

 

 

 

4

5

 

 

 

 

 

such as raw meat (longer seal time).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 2
Contents Features Features of Your FoodSaver ApplianceGetting Started How to Make a Bag from a FoodSaver RollHow to Vacuum Package with FoodSaver Bags How to Open FoodSaver Accessories after Vacuum Packaging FoodSaver AccessoriesFoodSaver Accessory Guidelines Manual Seal Button Additional FeaturesAccessory Hose Storage under lid Antibacterial Drip TraySealing a Bag TipsTips for Successful Vacuum Packaging Removing Air from a BagGeneral Tips