CONTENTS:
INSTALLER TECHNICAL MANUAL | pg. 2 |
Installing the cooker - Installation information | pg. 2 |
Backguard installation instruct | pg. 3 |
Electric connection | pg. 3 |
APPLIANCE MAINTENANCE - Replacing parts | pg. 4 |
USE AND MAINTENANCE MANUAL | pg. 4 |
Description of control panel and control types | pg. 4 |
Using the induction hob ………………………………………………………………………………………………. pg. 5
Hob control knob ………………………………………………………………………………………………………. pg. 5
Type of pan ………………………………………………………………………………………………………. pg. 6
Using the electric thermostat | pg. 7 |
Using the 9+0 switch | pg. 7 |
Using the natural conventional electric oven | pg. 8 |
Using the ventilated electric oven | pg. |
Using the electric grill - ventilated electric grill | pg. 9 |
Using the self cleaning oven | pg. 9 |
Cleaning the appliance | pg. 10 |
pg. 10 |
THIS APPLIANCE HAS BEEN DESIGNED FOR
INSTALLER TECHNICAL MANUAL
This appliance is marked according to the European directive 2002/95/EC
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
This guideline is the frame of a
INSTALLER INFORMATION
The installation, all adjustments, transformations and maintenance listed in this part of the manual must be carried out only by skilled personnel.
Improper installation may cause damage to persons, animals or property, for which the manufacture will not be held responsible.
The appliance safety or automatic adjustment devices may be changed during the service life of the system only by the manufacturer or by the duly authorised supplier.
INSTALLING THE COOKER
After having removed the various loose parts from the internal and external packing, make sure that the cooker is not damaged. In case of doubt, do not use the appliance and contact skilled personnel.
Keep all the dangerous packing parts (polystyrene foam, bags, cardboard, staples, etc.) away from children. The appliance can be installed as a freestanding unit, next to a wall or inserted between two walls (Fig.1). A single sidewall that exceeds the height of the work surface is possible. This must be at a minimum distance of 70 mm from the edge of the cooker (Fig. 1 I)
Any walls of the adjacent furniture pieces and the wall behind the cooker must be made with
WARNING: the connection to the gas network must only use metal flexible pipes that conform with the national standards in force.
IMPORTANT INFORMATION FOR INSTALLING THE APPLIANCE
The cooker can be installed separately, as a freestanding unit, or between kitchen units or between a kitchen unit and the wall. The device must be installed in accordance with the regulations stated in UNI 7129 and UNI 7131 standards.
This appliance is not connected to devices which exhaust combustion products.
Special attention must be focused on the prescriptions described below regarding room aeration and ventilation. Any hanging cabinets installed above the work surface must be located at a distance of no less than 700 mm.
2