Black Box EncrypTight Non IP Traffic Handling, CLI Inactivity Timer, Password Strength Policy

Page 326

Advanced Configuration

●“Reassembly Mode” on page 310

●“Features Configuration” on page 330

Non IP Traffic Handling

The non IP traffic handling setting is available when the ETEP is configured for use in Layer 3 encryption policies. This setting provides options for how to handle Layer 2 packets that are not IP at Layer 3. Non-IP packets can be discarded or passed in the clear. When discarding non-IP traffic, you have the option of passing ARP packets in the clear or discarding them as well. All packets that are IP at Layer 3 are handled according the policies that are loaded on the appliance.

When the non-IP discard feature is enabled, the appliance looks at the packet’s Layer 3 protocol flag. If the protocol flag is IP, then the appliance processes the packet normally. If the protocol flag is non-IP, then the appliance discards the packet. This processing applies to both inbound and outbound packets.

The appliance’s default setting is clear, where non-IP packets are passed in the clear and IP packets are processed according to the policies loaded on the appliance.

Table 101 Non IP traffic handling configuration

Setting

Description

clear

All packets that are non-IP at Layer 3 are passed in the clear.

discard

All packets that are non-IP at Layer 3 are discarded. ARP packets are

 

excluded from the discard action.

discardIncludingARP

All packets that are non-IP at Layer 3 are discarded, including ARP

 

packets.

 

 

Related topic:

●“Features Configuration” on page 330

CLI Inactivity Timer

The CLI session is terminated if no activity is detected on the CLI in a specified amount of time. The inactivity timer is set to 10 minutes by default. The timer applies to a CLI session initiated through the serial port or through SSH.

The inactivity timer is specified in minutes, with valid values ranging from 0–1440 minutes (24 hours). When the CLI inactivity timer is set to zero the session does not time out.

Setting the inactivity timer does not affect the current CLI session. The change is effective on all subsequent CLI sessions.

Password Strength Policy

The password strength policy affects the following items:

●Password conventions

●Password history exclusion, which limits the reuse of passwords

●Password expirations, warnings, and grace periods

EncrypTight User Guide

327

Page 325 Page 327
Image 326
Page 325 Page 327
Contents EncrypTight User Guide Table of Contents Managing EncrypTight Users Getting Started with Etems Provisioning AppliancesManaging Appliances 117 Managing Network Sets Managing Key Management SystemsManaging IP Networks Creating Vlan ID Ranges for Layer 2 NetworksPolicy Design Examples 211 Using Enhanced Security Features Modifying the Etkms Properties FileEtep Configuration 299 302 Index 343 Preface About This DocumentContacting Black Box Technical Support Part I EncrypTight Installation and Maintenance EncrypTight User Guide EncrypTight Overview Distributed Key TopologiesLayer 3 IP topologies Network topologiesTopology Description Layer 2 Ethernet topologiesEncrypTight Elements Related topicsKey Management System EncrypTight Element Management SystemPolicy Manager Policy Enforcement Point Single Etkms for multiple sitesPoint-to-Point Negotiated Topology Shared keysSecurity within EncrypTight Layer 2 Point-to-Point DeploymentSecure Communications Between Devices Secure Key Storage within the EtkmsEncrypTight Deployment Planning EncrypTight Component ConnectionsManagement Station Connections Etpm to Etkms ConnectionsEtpm and Etkms in Layer 3 IP Policies Etpm and Etkms on the Same SubnetworkEtpm and Etkms on Different Subnetworks Out-of-band Etkms management in an Ethernet network Connections for Backup ETKMSs External Etkms to Etkms ConnectionsConnecting Multiple ETKMSs in an IP Network Etkms to Etkms Connections in Ethernet NetworksEtkms to PEP Connections Etkms to PEP Connections in IP NetworksEtkms to PEP Connections in Ethernet Networks In-line Etkms to PEP communications in IP networksNetwork Clock Synchronization IPv6 Address SupportAddress Format Address Representation Certificate SupportIPv6 address representations Addressing Method Description Network Addressing for IP NetworksNetwork Addressing Options Related topics Installation and Configuration Before You StartEncrypTight management station requirements Hardware RequirementsSoftware Requirements Third party management station softwareTo install the EncrypTight software EncrypTight Software InstallationInstalling EncrypTight Software for the First Time Firewall PortsUpgrading to a New Version of EncrypTight Uninstalling EncrypTight SoftwareTo uninstall EncrypTight Starting EncrypTightTo start Etems Management Station ConfigurationExiting EncrypTight Related topicEnabling the Microsoft FTP Server To enable the Microsoft FTP Server serviceSecuring the Management Interface Etems communications optionsConfiguring the Syslog Server Installing ETKMSsConfiguring ETKMSs Etkms server connectionsAdding a Local Etkms Basic Configuration for Local ETKMSsAbout Local ETKMSs To add a local Etkms Launching and Stopping a Local EtkmsStarting the Local Etkms Automatically To launch a local EtkmsTo configure the batch file Configuring External ETKMSsPrior to configuring the batch file do the following Maintaining the start.bat fileLogging Into the Etkms Changing the Admin PasswordTo change the admin password To log into the EtkmsChanging the Root Password To change the root passwordStatic IP Netmask Default Gateway IP address Configure the Network ConnectionTo configure the network connection and hostname IPv4To set the default DNS server and configure the hosts file To configure the network interfaceTo set the hostname and IPv6 default gateway address IPv6To set the time zone Configure Time and Date PropertiesTo set up time synchronization To check the time source connection status Ntpq -p command outputTo restart the NTP daemon Field DescriptionStarting and Stopping the Etkms Service Check the Status of the Hardware Security ModuleTo configure syslog reporting on a Etkms Configuring Syslog Reporting on the ETKMSsTo check the status of the Etkms service Checking the Status of the EtkmsPolicy Enforcement Point Configuration Managing Licenses Default User Accounts and PasswordsPasswords to change Etep Throughput SpeedsTo enter EncrypTight licenses Installing LicensesTo install a license on the Etep Choose Tools Put LicenseUpgrading the EncrypTight License Next StepsUpgrading Licenses Upgrading Etep LicensesNext Steps Installation and Configuration EncrypTight User Guide Managing EncrypTight Users Working with EncrypTight User AccountsEncrypTight account types and privileges Configuring EncrypTight User AuthenticationTask Administrator User Common Access Card Authentication Password Authentication and ExpirationLogin Session Inactivity Timer DoD Login Banner Preference Setting Login preferences default settingsEncrypTight user name and password conventions Parameter User Name PasswordTo add an EncrypTight user account Changing an EncrypTight User PasswordTo change a password To modify an EncrypTight user accountHow EncrypTight Users Work with Etep Users Example 1 Default EncrypTight user and default Etep userExample 2 Setting up new EncrypTight and Etep users Relationship between EncrypTight users and Etep usersExample 3 Adding a new Etep user to EncrypTight About the EncrypTight Workspace Maintenance TasksWorking with the EncrypTight Workspace On the File menu, click Save Workspace To Saving a Workspace to a New LocationTo save a workspace to a new location Loading an Existing Workspace To load an existing workspaceTo move a workspace to a new PC Moving a Workspace to a New PCDeleting a Workspace To delete a workspaceInstalling Software Updates Schedule the UpgradeVerify Etkms Status and Deploy Policies Upgrade the EncrypTight SoftwarePrepare Etpm Status and Renew Keys Upgrade PEP Software To deploy policiesFTP server site information for appliance software upgrades To upgrade software on the PEPsOn the Tools menu, click Upgrade Software To change the software version of the PEPs Click Edit Multiple Configurations Software VersionChange the PEP Software Version and Check Status To check the status of the PEPsTo stop and remove the current Etkms software Return Status Refresh and Key Renewal to Original SettingsUpgrading External ETKMSs To mount the Cdrom drive To install the new Etkms softwareTo configure the new Etkms software To start the Etkms softwareMaintenance Tasks EncrypTight User Guide Part II Working with Appliances using EtemsEncrypTight User Guide Etems Quick Tour Defining Appliance ConfigurationsGetting Started with Etems Pushing Configurations to Appliances Interface configuration for a new ET1000A applianceComparing Configurations Upgrading Appliance SoftwareMaintenance and Troubleshooting Understanding the Etems Workbench Policy and Certificate SupportAppliance Manager perspective Views EditorsTo open a perspective ToolbarsPerspectives Etems toolbarCertificate Manager toolbar Status IndicatorsAppliance Manager toolbar Understanding Roles Appliance status indicatorsStatus Indicator Description EncrypTight User TypesAppliance roles for ETEPs Function Administrator OpsModifying Communication Preferences To change communication preferencesPreference Description Strict authentication communication preferencesGeneral communication preferences CRL File Location Ignore CRL accessEnable Certificate Policy ExtensionsProvisioning Appliances Provisioning BasicsAdding a New Appliance New Appliance editor for the ET1000A To add a new applianceTo push Etems configurations to appliances Saving an Appliance ConfigurationSaving appliance configurations On the Tools menu, click Put ConfigurationsResult Description Put configuration statusViewing Appliance Status To configure automatic status checking Appliances viewEtems Filtering Appliances Based on Address To apply a filter to the appliances in the Appliances viewAppliance User Management Rebooting AppliancesTo reboot appliances Etep User RolesRole Default user name Default password Configuring the Password Enforcement PolicyDefault user names and passwords on the Etep Appliance roles for ETEPs v 1.4 and laterUser Name Conventions Default Password Policy ConventionsStrong Password Policy Conventions Removing ETEPs From Service Upgrading SoftwareTo add a user to the Etep Managing Appliance UsersAdding Etep Users On the Tools menu, click Appliance User Add UserPassword policy values Default password Strong password Parameter PolicyTo modify Etep user credentials Modifying Etep User CredentialsDeleting Etep Users On the Tools menu, click Appliance User Modify UserOn the Tools menu, click Appliance User Delete User Viewing Etep UsersTo delete a user from the Etep To customize the default configuration Working with Default ConfigurationsCustomizing the Default Configuration On the Edit menu, click Default ConfigurationOn the Edit menu, click Default Configurations Restoring the Etems Default ConfigurationsTo return the default values to factory settings Provisioning Large Numbers of AppliancesCreating a Configuration Template Importing Configurations from a CSV FileTo import appliance configurations to Etems Attribute DescriptionImporting Remote and Local Interface Addresses Remote and local keywords and attributesChanging Configuration Import Preferences Shutdown operational codes Shutting Down AppliancesChecking the Time on New Appliances To shut down the EtepEditing Configurations Managing AppliancesTo change the management IP address on the appliance Changing the Management IP AddressChanging the Address on the Appliance Changing the Address in Etems Change Management IP window Related topicsChanging the Date and Time Operation failed message in response to management IP changeTo edit the configuration of a single appliance Changing Settings on a Single ApplianceChanging Settings on Multiple Appliances To change the date and timeTo update an appliance setting on multiple appliances Deleting AppliancesUpgrading Appliance Software Connecting Directly to an ApplianceConnecting to the Command Line Interface To delete appliances124 EncrypTight User Guide To upgrade software 126 EncrypTight User Guide What to do if an Upgrade is Interrupted Restoring the Backup File SystemCanceling an Upgrade Checking Upgrade StatusTo restore the appliance file system from a backup copy Part III Using Etpm to Create Distributed Key Policies 130 EncrypTight User Guide About the Etpm User Interface Getting Started with EtpmOpening Etpm To open EtpmEtpm perspective EncrypTight Components View Component ChapterEditors Policy View Etpm Status IndicatorsStatus indicators To edit an element from the policy viewSorting and Using Drag and Drop Etpm Status Refresh Interval To enable or disable automatic status checkingEtpm Toolbar Etpm toolbarEthernet Policies About Etpm PoliciesIP Policies Policy Generation and Distribution Policy generation and distributionKey generation with one Etkms Creating a Policy An Overview Key generation with multiple ETKMSsNetwork Set a Network aNetwork B Network Set BTo create a policy 144 EncrypTight User Guide EncrypTight User Guide 145 146 EncrypTight User Guide Managing Policy Enforcement Points Provisioning PEPsAdding a New PEP in Etems EncrypTight PEP configurationConfiguration Description On the Features tab, select Enable passing TLS traffic On the Advanced tab, select Enable Sntp ClientAdding Large Numbers of PEPs Adding a New PEP Using EtpmTo add a new PEP using Etpm To edit a PEP’s configuration Pushing the ConfigurationTo push Etems configurations to PEPs Editing PEPsEditing Multiple PEPs To change the NTP settings for multiple PEPsSelect Edit Multiple Configurations Sntp Client Editing PEPs From EtpmChanging the PEP from Layer 3 to Layer 2 Encryption Deleting PEPsChanging the IP Address of a PEP To change the IP address of a PEPTo delete PEPs Managing Key Management Systems Etkms connectionsAdding ETKMSs To add an EtkmsEtkms entries Editing ETKMSsDeleting ETKMSs To edit an existing EtkmsTo delete an existing Etkms Managing IP Networks Adding NetworksNetwork IP To add a networkNetwork entries Address Network MaskAdvanced Uses for Networks in Policies Grouping Networks into SupernetsUsing Non-contiguous Network Masks Networks definitions IP Address Network MaskTo edit an existing network Editing NetworksDeleting Networks To delete a network Managing IP Networks 166 EncrypTight User Guide Managing Network Sets Network SetsIP address Mask 40.55.11.0 255.255.255.0 Types of Network SetsIP address Mask 40.32.21.0 255.255.255.0 Network set for a collection of networks IP address MaskNetwork Set fields Adding a Network SetTo add a Network Set Network Addressing Key ManagementSystem ModeImporting Networks and Network Sets Network Set editorNetworks and network sets import document format in Excel To import networks and network sets into Etpm Editing a Network SetDeleting a Network Set To edit a Network SetTo delete an existing network set Managing Network Sets 176 EncrypTight User Guide To add a new Vlan ID Range Creating Vlan ID Ranges for Layer 2 NetworksAdding a Vlan ID Range Upper Vlan ID Vlan ID range entriesLower Vlan ID To edit a Vlan ID range Editing a Vlan ID RangeDeleting a Vlan ID Range To delete an existing Vlan ID range180 EncrypTight User Guide Creating Distributed Key Policies Policy ConceptsPolicy Priority Schedule for Renewing Keys and Refreshing Policy LifetimeLayer 2 Ethernet payload encryption Policy Types and Encryption MethodsEncapsulation To use Aria in an encryption policy, do the following Encryption and Authentication AlgorithmsAria Encryption Key Generation and ETKMSs Addressing ModeUsing Encrypt All Policies with Exceptions Policy Policy Type Priority Action Protocol Covered Policy Size and Etep Operational LimitsEncrypt all policy with exceptions Minimizing Policy Size Adding Layer 2 Ethernet Policies To add a new Layer 2 mesh policyLayer 2 Mesh policy entries Layer 2 Mesh policy editor Adding Layer 3 IP Policies Adding a Hub and Spoke PolicyTo add a new hub and spoke policy Hub and spoke policy entriesMinimize Policy IPSecAddressing SizeHub and spoke policy editor Adding a Mesh Policy To add a new mesh policyMesh policy entries Specifies a method for reducing the policy size Mesh policy editor Adding a Multicast Policy Multicast network exampleTo add a multicast policy Multicast policy entriesMulticast NetworkMulticast policy editor Adding a Point-to-point Policy To add a point-to-point policyPoint-to-point policy entries Point a Ports Point aNetwork Set Point BAdding Layer 4 Policies Point-to-point policy editorTo create a new Layer 4 policy Policy DeploymentVerifying Policy Rules Before Deployment Deploying Policies Setting Deployment Confirmation PreferencesTo enable or disable the deployment warning To verify policiesTo edit an existing policy Editing a PolicyDeleting Policies Editing policiesSelect Tools Clear Policies To delete an existing policyTo delete all policies Policy Design Examples Basic Layer 2 Point-to-Point Policy ExamplePoint-to-point Layer 2 encryption policy Layer 2 Ethernet Policy Using Vlan IDsSetting PEP Policy 2 Partner and Partner Portal Server Policy 3 Discard All OtherComplex Layer 3 Policy Example Encrypt Traffic Between Regional CentersEncrypt all mesh policy Encrypt Traffic Between Regional Centers and BranchesNetwork sets for mesh policy Network sets for the hub and spoke policies Region a hub and spoke policyRegion D hub and spoke policy Region B hub and spoke policyRegion C hub and spoke policy FieldPassing Routing Protocols Pass protocol 88 in the clear mesh policyEncrypTight User Guide 219 Policy Design Examples 220 EncrypTight User Guide Part IV Troubleshooting 222 EncrypTight User Guide Etems Troubleshooting Possible Problems and SolutionsAppliance Unreachable Symptom Explanation and possible solutionsConfig to Appliance PreferencesAppliance Configuration Disable-trusted-hosts CLI commandCompare Config to Appliance . Do one of the following Pushing ConfigurationsAppliance Tools Reboot Pinging the Management Port Software UpgradesAbout upgrades show system-log and show upgrade Status To ping the management portTools preferences To change the default ping tool Retrieving Appliance Log FilesFTP server site information for log retrieval To retrieve log files from an applianceOn the Tools menu, click Retrieve Appliance Logs Viewing Diagnostic Data Viewing StatisticsEtep Statistics Statistic DescriptionViewing Port and Discard Status Exporting SAD and SPD FilesCLI Diagnostic Commands To access the appliance CLITo view the log information Working with the Application LogViewing the Application Log from within EncrypTight Exporting the Application Log Setting Log FiltersSending Application Log Events to a Syslog Server Icon Description Other Application Log ActionsLog File Actions Monitoring Status Etpm and Etkms TroubleshootingLearning About Problems Symptoms and Solutions Etpm status problems and solutionsPolicy Errors Etep PEPs, see the EncrypTight User GuideStatus Errors Renew Key ErrorsEtkms Log Files Viewing Log FilesEtpm Log Files Command Description Etkms Troubleshooting ToolsLinux Commands Etkms Server OperationOptimizing Time Synchronization PEP Troubleshooting ToolsResetting the Admin Password Shutting Down or Restarting an External EtkmsEtep PEP Policy and Key Information To disable the Sntp client on multiple PEPsStatistics To view statisticsChecking Traffic and Encryption Statistics Troubleshooting PoliciesReplacing Licensed ETEPs To export SAD or SPD files from Etep PEPsViewing Policies on a PEP Solving Policy ProblemsPlacing PEPs in Bypass Mode Allowing Local Site Exceptions to Distributed Key Policies Expired PoliciesSolving Network Connectivity Problems Cannot Add a Network Set to a PolicyCannot Communicate with PEP Certificate Implementation ErrorsModifying EncrypTight Timing Parameters Invalid Parameter in Function Call Etkms Boot ErrorInvalid Certificate Error To disable strict authentication on ETEPs Enter strict-client-authentication disableEtpm and Etkms Troubleshooting 252 EncrypTight User Guide Part V Reference 254 EncrypTight User Guide Modifying the Etkms Properties File About the Etkms Properties FileLogging Setup Hardware Security Module ConfigurationDigital Certificate Configuration Base Directory for Storing Operational State Data Peer Etkms and Etpm Communications TimingPolicy Refresh Timing PEP Communications TimingPEP Communications Timing Page Using Enhanced Security Features About Enhanced Security FeaturesAbout Strict Authentication Prerequisites Prerequisites for Using Certificates with EncrypTightHow to Reference Order of OperationsDistinguished name information Setting DescriptionCertificate Information Using Certificates in an EncrypTight System Usage, you type this string as followsChanging the Etkms Keystore Password Changing the Keystore PasswordChanging the EncrypTight Keystore Password To change the EncrypTight keystore passwordChanging the Keystore Password on a Etkms To change the password listed in the Etkms properties file Changing the Keystore Password on a Etkms with an HSMChanging the Password Used in the Etkms Properties File Restart the Etkms Service To start the Etkms serviceClick Enable Policy Extensions Configuring the Certificate Policies ExtensionTo configure the certificate policies extension for ETEPs Etkms Certificate Policies Entries To configure certificate policy extensions for ETKMSsClick Enable Certificate Policy Extensions Parameter DescriptionEncrypTight User Guide 271 Working with Certificates for EncrypTight and the ETKMSs Generating a Key PairTo generate a key pair Keytool genkeypair CommandRequesting a Certificate To create the certificate requestImporting a CA Certificate Reply To install a CA certificateImporting a CA Certificate Keytool Parameters for Importing a CA CertificateExporting a Certificate Configuring the HSM for KeytoolWorking with Certificates and an HSM Importing CA Certificates into the HSM Generating a Key Pair for use with the HSMImporting Signed Certificates into the HSM Working with Certificates for the ETEPsGenerating a Certificate Signing Request for the HSM Understanding the Certificate Manager Perspective To start the Certificate Manager do one of the followingObtaining External Certificates Certificate Manager WorkflowWorking with External Certificates To obtain a CA certificate from a CA Installing an External CertificateTo install an external certificate Working with Certificate Requests Requesting a Certificate282 EncrypTight User Guide Certificate usage Installing a Signed CertificateViewing a Pending Certificate Request To view a pending certificate signing requestTo cancel a pending certificate request Canceling a Pending Certificate RequestSetting Certificate Request Preferences To set certificate request preferencesManaging Installed Certificates Certificate request preference fieldsExporting a Certificate To export an installed certificateViewing a Certificate Deleting a Certificate Validating Certificates Using CRLsValidating Certificates To delete an external certificateTo use CRLs with the EncrypTight software Configuring CRL Usage in EncrypTight and the ETKMSsConfiguring CRL Usage on ETEPs To use CRLs with the EtkmsHandling Revocation Check Failures Validating Certificates Using OcspTo install a CRL on the Etep To view CRLsEncrypTight Ocsp Options To set up Ocsp in EncrypTightClick Enable Online Certificate Status Protocol Ocsp Options DescriptionClick Enable Ocsp To set up Ocsp in the EtkmsTo set up Ocsp on the ETEPs Ocsp SettingsTo enable strict authentication on the Etkms Enabling and Disabling Strict AuthenticationTo enable strict authentication in the EncrypTight software To enable strict authentication on PEPsTo disable strict authentication from the command line To disable strict authenticationClear the Enable Strict Client Authentication box Removing CertificatesSelect Tools Clear Certificates Using a Common Access CardTo remove certificates To add common names to the Etkms Configuring User Accounts for Use With Common Access CardsEnabling Common Access Card Authentication To enable CAC Authentication on the Etkms To enable CAC Authentication on the EtepClick XML-RPC Certificate Authentication To enable CAC Authentication in EncrypTightTo specify how to handle common name failures Handling Common Name Lookup FailuresUsing Enhanced Security Features 298 EncrypTight User Guide Etep Configuration Appliance Name Identifying an ApplianceProduct Family and Software Version Throughput Speed Interface ConfigurationTo configure appliance interfaces ET0100A interfaces configuration Related topics Management Port AddressingIPv4 Addressing IPv4 management port addressingIPv6 Addressing IPv6 management port addressingAuto-negotiation All Ports Link speeds on the management portLink speeds on the local and remote ports Remote and Local Port SettingsTransparent Mode Local and Remote Port IP Addresses When to use transparent modePolicy Type Mode of operation IP Address and Subnet Mask Transmitter EnableDefault Gateway Transmitter Enable settings on the Etep Dhcp Relay IP AddressReassembly mode settings Reassembly ModeIgnore DF Bit settings Ignore DF BitTrusted Hosts Trusted host listProtocol Inbound trusted host protocols used by EncrypTightTo add a trusted host Outbound host Appliance Editor TabSnmp Configuration System InformationTo define a community name Community StringsSnmp system information Under Community Strings, click AddTrap Description TrapsTraps reported on the Etep SNMPv3 To configure a trap hostSNMPv2 Trap Hosts SNMPv3 Configuration Related topics To retrieve engine IDs Generating the Engine IDRetrieving and Exporting Engine IDs Configuring the SNMPv3 Trap Host Users Viewing SNMPv3 Engine IDs Related topicsSNMPv3 Trap Host configuration To configure a trap host user SNMPv3 trap host usersLogging Configuration Etep Logging tabFacility Description Log Event SettingsLog facilities To define a syslog server Defining Syslog ServersLog priorities Under Syslog Servers, click AddLog name File size Log File ManagementLog file sizes Internals logsAdvanced Configuration Log files extracted from the Etep Related topicsPmtu and fragmentation behavior on the Etep Path Maximum Transmission UnitValid Pmtu ranges on Etep appliances Packet Payload Size Layer 2 Etep Layer 3 EtepNon IP traffic handling configuration CLI Inactivity TimerPassword Strength Policy Non IP Traffic HandlingXML-RPC Certificate Authentication To configure the NTP client SSH Access to the EtepSntp Client Settings IKE Vlan TagsCertificate Policy Extensions Features ConfigurationOcsp Settings IKE Vlan TagsFips approved encryption and authentication algorithms Fips ModeEnabling Fips Mode Encryption algorithms Authentication algorithmsVerifying Fips Status on the Etep Policy Type Action upon entering Fips modeDisabling Fips Operational NotesSetting Definition EncrypTight SettingsEncrypTight settings Working with Policies Encryption Policy SettingsEncryption policy settings To launch Etpm from Etems Using EncrypTight Distributed Key PoliciesCreating Layer 2 Point-to-Point Policies Etep Policy tab Selecting a Role Using Preshared Keys for IKE AuthenticationUsing Group IDs IKE Phase 2 Parameters Selecting the Traffic Handling ModeHow the Etep Encrypts and Authenticates Traffic Parameter ValueInterfaces Default Setting Factory DefaultsInterfaces defaults InterfacesTrusted Hosts Trusted hosts defaultsSnmp defaults Advanced LoggingPolicy Features defaults FeaturesHard-coded Settings Features Default SettingIndex NumericsIndex EncrypTight User Guide 345 Etpm See also HSM Https TLS 348 EncrypTight User Guide EncrypTight User Guide 349 350 EncrypTight User Guide See also TLS trap configuration 352 EncrypTight User Guide Black Box Tech Support FREE! Live /7
Related manuals
Manual 48 pages 53.09 Kb Manual 88 pages 24.35 Kb

EncrypTight, ET0100A, ET0010A, ET1000A specifications

The Black Box ET1000A, ET0010A, EncrypTight, and ET0100A are advanced solutions designed for secure data transmission and network management, catering to modern enterprise needs. These tools integrate cutting-edge technologies to enhance connectivity, security, and efficiency within various environments.

The Black Box ET1000A is primarily a high-performance Ethernet over Twisted Pair (EoTP) solution. It enables users to extend Ethernet signals over long distances using existing twisted-pair cabling without sacrificing speed or reliability. With support for speeds up to 100 Mbps, this device is ideal for organizations looking to upgrade their existing infrastructure without extensive rewiring. Key features include plug-and-play installation, which simplifies deployment, and versatile compatibility with both legacy and modern ethernet networks.

The ET0010A model takes connectivity a step further by providing seamless integration with fiber optics. This device supports transmission distances that far exceed traditional copper solutions, making it a perfect fit for larger facilities or multi-building campuses. Its built-in Ethernet switch enhances network efficiency by providing multiple ports for device connectivity, thus facilitating greater data flow.

EncrypTight technology is a notable feature across these Black Box models, offering advanced encryption capabilities to safeguard sensitive data during transmission. With military-grade encryption protocols, EncrypTight ensures that corporate information remains secure from potential eavesdroppers. This technology is essential for businesses operating in regulated industries or that handle confidential customer information.

The ET0100A model combines intelligence with monitoring features to provide users with comprehensive network insights. It boasts built-in diagnostic tools that enable IT professionals to troubleshoot issues quickly and efficiently. Additionally, it features real-time performance monitoring, allowing users to analyze bandwidth usage and optimize network performance accordingly.

In conclusion, the Black Box ET1000A, ET0010A, EncrypTight, and ET0100A are powerful tools that embody the latest in data transmission and network management technologies. With their unique features—including extended connectivity capabilities, robust encryption technologies, and real-time monitoring solutions—these devices cater to the growing demands of businesses seeking to enhance their network infrastructure while ensuring robust security and efficiency. Integrating these tools into any organization’s operations can fundamentally improve both performance and data protection, making them indispensable in today’s digital landscape.
Top Page Image Contents