Panel Descriptions, Control Panel Jack Panel

Panel Descriptions

Control Panel

fig.01












1	2	3	4	5	6	7	8

Jack Panel

fig.01

CHANNEL CONTROL

1. CH 1 knob / CH 1 Input Jacks

In addition to a 1/4” phone jack, this channel is equipped with a balanced XLR connector, useful for connecting microphones.

This accepts input levels ranging from mic input (-50 dBu) to line level from sound modules and other equipment (-20 dBu).

2.CH 2 and CH 3 knobs / CH 2 and CH 3 Input Jacks

Use these for connecting keyboards, sound modules, and other devices.

They accept line level input (-20 dBu).

MASTER CONTROL

These adjust the tone and volume level for the built-in speakers or for headphones.

3. LOW Knob

This adjusts the level of the bass range.

4. HIGH Knob

This adjusts the level of the treble range.

5. VOLUME Knob

This adjusts the total volume level of the unit’s internal speaker. The SUBWOOFER OUT output is also changed. When connecting headphones, adjust the headphone volume level.

* The VOLUME knob do not affect the line outs.

6. PHONES Jack

This is for connecting headphones. The unit’s speakers are deactivated when headphones are plugged in.

Also, no signals are output from SUBWOOFER OUT (p. 7).

*Always be sure to lower the VOLUME knob to 0 whenever connecting and disconnecting headphones.

*Although the PHONES jack accepts stereo plugs, the audio output is mono.