OPERATING INSTRUCTIONS
THE CONTROL PANEL
Your ASKO dishwasher has a
Power button (on the top side of the control panel) | Program button | Start/Stop button | ||||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Program |
|
|
|
|
|
|
|
| indicator |
|
|
|
|
|
|
|
| lights |
|
|
|
|
|
|
|
|
|
|
|
|
Temperature Program progression button indicator lights
PROGRAMS
To select a program, simply press the Program button until the indicator light behind the desired program glows. The programs are described below:
Heavy Wash (160° F or 130° F)
For the heaviest soiled loads, such as pots, pans, casseroles, etc.
Normal Wash (130° F or 140° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans.
Quick (85° F or 120° F)
For lightly soiled loads that are washed immediately after use. This program is good for delicate items, such as fine china and crystal, but you should set the temperature to low and dry the dishes without heat.
Rinse and hold
To rinse dishes that you plan to wash later that day.
Program Times
“The Normal Wash program is used for energy testing and should be used for normal or lightly soiled loads. When washing dishes that are more heavily soiled, use a longer program with higher temperatures such as Heavy Wash.”
The program times may not always be the same because of variations in the household hot water temperature. The dishwasher heats the water to the proper temperature for the program selected; so if the temperature of the water entering the dishwasher is too low, the dishwasher will run longer because it takes longer to heat the water. Raising your water heater setting could help to shorten the cycle times.
OPTIONS
To select an option, simply press the appropriate option button. The options are described below.
Temperature
The dishwasher has two temperature options for each wash program, as shown above. When this button is set on the high temperature, the main wash is heated to the higher temperature for the selected program. If it is set to low, the main wash is heated to the lower temperature. The indicator light will glow only when the high temperature is selected.
POWER BUTTON
Press this button to turn the main power to the unit on and off. Refer to the illustration above to see the location of the power button.
START/STOP BUTTON
Once you have selected the wash program and temperature option, press this button to start the dishwasher. (Make sure the door is securely closed.) The indicator light around the button will glow progressively as the program goes through each cycle. When the program is complete, the lights will glow all the way around the button.
Page 7