Mr. Coffee ECMP3 manual Cleaning

After cleaning, move the filler clip backward (Figure 27).

The filter holder may be stored screwed onto the appliance (Figure 28).

CLEANING

Wash the filters, the filter holder, the water tank, the drip-basin and grid regularly.

Regularly clean the brew head, removing any stuck grains

of coffee.

Clean the frothing nozzle, particularly after frothing milk, with a damp clolh. If necessary, the frothing nozzle can be unscrewed in a counter-clockwise direction using the end of the measuring spoon and then it can be cleaned (Figures 29 and 30). The nozzle must be screwed on again in a clockwise direction. Tighten using reasonable force with the end of the measuring spoon provided.

The exterior of the unit may be cleaned with a damp cloth.