Mr. Coffee DSP10 manual Important Things You Should Know

Page 5

Important Things You Should Know

•The SPEEDBREW™ coffeemaker is designed to remain plugged in at all times (except during draining and extended periods of non-use). Brewing begins after water is poured into the water reservoir.

•A Reservoir Power Switch (ON/OFF switch) is located on the lower left side to com- pletely shut off all electrical components when your plans take you away from home for several days or when your coffeemaker will not be in use for an extended period. Your SPEEDBREW ™ coffeemaker has safety features which make the daily use of this switch unnecessary.

•Whenever the SPEEDBREW ™ Reservoir Power Switch has been turned OFF, or the unit unplugged, allow the water in the tank to heat to the proper temperature before using. (This will take approximately 15 minutes after the Reservoir Power Switch has been turned on).

•Your SPEEDBREW ™ coffeemaker unit has an especially designed water reservoir to keep the water at the proper temperature. This constant supply of hot water allows you to brew regular coffee in about 3 minutes.

•When a pitcher of cold water is poured into the water reservoir, the cold water enters the internal tank and pushes out hot water to start the brewing process. This cold water is then heated to the proper temperature and stored until the next brew cycle is started. Make sure the decanter is on the warmer plate before water is added.

•Brewed coffee flows into the decanter where it is kept at serving temperature by the warmer plate. The warmer plate is controlled by the ON/OFF switch located above the brew basket. NOTE: The Warmer Plate Switch only controls the decanter warmer. The warmer plate switch should be turned off when the decanter is empty or the coffeemaker is not in use. (For the Warmer Plate Switch to operate, the Reservoir Power Switch must be on.)

•The decanter lid reduces coffee evaporation and heat loss. Always place the lid on the decanter when brewing coffee.

•The two position Regular/Decaffeinated Brew Control Dial is located behind the water reservoir lid. This allows for proper brewing of regular or decaffeinated coffee. Decaffeinated coffee takes longer to brew than regular coffee.

•WARNING: To avoid risk of scalding or other injury, do not move your SPEEDBREW ™ coffeemaker once you have filled the water reservoir.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MR Coffee Decanter Use and Care Read all instructions before using the machineDo not use outdoors Cleveland, OH If Service Is Required, Do Not Return to Your StoreConsumer Affairs Department Introduction Table of ContentsDiagram of Parts Important Things You Should Know Prepare Your Coffeemaker Before First Use Before Using Your Speedbrew Coffeemaker the First TimeBrewing Coffee Hold vinegar for cleaning see Routinge Cleaning onDraining the Water Reservoir Brew Control Dial Decaffeinated CoffeeTo Get Hot Water Only Decanter Cleaning Routine CleaningSection titled Prepare Your Brewer Before First Use Troubleshooting GuidePage Limited Warranty

DSP10 specifications

The Mr. Coffee DSP10 is an innovative coffee maker designed for coffee enthusiasts who appreciate a brew that combines convenience with quality. This machine stands out for its ability to simplify the brewing process while retaining the rich flavors and aromas expected from traditional coffee. One of the key features of the DSP10 is its unique dual brew system that allows users to make coffee from ground beans or soft coffee pods. This versatility caters to both traditionalists and those looking for quick and easy preparation.

Equipped with a 10-cup capacity, the Mr. Coffee DSP10 is perfect for households or small offices where multiple servings are essential. The machine features a programmable timer that allows users to set their brewing time up to 24 hours in advance. This means that you can wake up to the alluring scent of freshly brewed coffee without the hassle of morning prep. The intuitive interface includes easy-to-read digital controls, making it user-friendly even for those who aren't tech-savvy.

Another significant characteristic of the DSP10 is its built-in water filtration system that ensures only purified water is used in the brewing process. This feature not only improves the taste of the coffee but also extends the lifespan of the machine by reducing calcium buildup. The removable water reservoir simplifies filling and cleaning, and its clear design allows users to easily monitor water levels.

Additionally, the Mr. Coffee DSP10 is equipped with a keep-warm plate that maintains the coffee temperature after brewing, ensuring that every cup remains hot and enjoyable. The machine also boasts a pause-and-serve feature, allowing users to pour a cup before the entire pot has finished brewing, which is perfect for impatient coffee lovers.

In terms of design, the Mr. Coffee DSP10 presents a sleek and modern appearance that fits seamlessly into any kitchen aesthetic. Its compact footprint makes it an ideal choice for those with limited counter space. The coffee maker is not only functional but also easy to clean, with dishwasher-safe components that minimize the hassle of maintenance.

In summary, the Mr. Coffee DSP10 is a versatile and user-friendly coffee maker that brings together advanced features, ease of use, and aesthetic appeal, making it an excellent choice for anyone looking to elevate their coffee experience. With its dual brew capabilities, programmable functions, and quality filtration system, it ensures that every cup is brewed to perfection.
Top Page Image Contents