Special Cord SET Instructions

1.A short power supply cord is provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord.

2.An extension cord may be purchased and used if care Is exercised in Its use.

3.If an extension cord is used, the marked electrical rating of the exten- sion cord must be at least 10 amps and 120 volts. The resulting extended cord must be arranged so that It will not drape over the

counter top or table top where It can be pulled on by children or tripped over accidentally.

Note:

This appliance has a polarized plug (one blade is larger than the other). As a safety feature, this plug will fit in a polarized bullet only one way. If the plug does not fully fit in the outlet, reverse

the plug. If it still does not fit, contact a electrician. Do not attempt to defeat this safety feature.

CAUTION:

1)Do not remove the filter holder at any time during the brewing process.

2)Do not let the pump run with an empty water container. This can damage the pump permanently.

3)Use caution removing the filter holder from the brew head. The metal parts may still be very hot. Also, there may be hot water floating on the top of the filter basket.

4)When using the frothing tube make sure the tip of the tube is submerged In liquid before turning the steam selector control knob to the “ON” position.