TO AUTOMATICALLY BREW AT PRE-SET TIME...
1.Follow steps #1 through #5in “How to Brew Coffee”.
2.Always slide the control switch to OFF and then to AUTO.
3.Brewing will begin at the time you have preset and the coffee will remain hot in the decanter for 2 hours. If more keep warm time is needed, turn the switch to ON for an additional 2 hour keep warm time.
IMPORTANT
To Reset Auto Brew at Pre-Set Time.....
This coffeemaker will NOT automatically come on again the next day if you leave the switch in the AUTO position after its last use. This is a safety feature. Each time you choose to use auto brew you must slide the switch to OFF and then to AUTO.
To make sure Auto brew is set, check the auto off light. If the light is off, auto brew is set. If it is on, slide the switch to OFF and then to AUTO.
Before Using Your Mr. Coffee
Make sure your first cup of coffee is as good as can be by cleaning
your Mr. Coffee coffeemaker before you use it the first time. Just
_
follow these simple steps:
1.Wash the .decanter, lid and brew funnel in a mixture of mild detergent and water. Rinse each thoroughly.
2.Set the clock. The clock on this model must be set first, before the coffeemaker will operate. See instructions for setting the clock.
3.Slide the brew funnel into place and then follow steps #4 through #6 in the “HOW TO BREW COFFEE” section. This will clean the inside of your coffeemaker.
4.When the brew cycle is finished, slide the control switch to off. Discard the water in the decanter and rinse the decanter and brew funnel.
Your coffeemaker is now ready to use.