Mr. Coffee SPR-101006 manual Brewing Coffee NOW, Adding Water and Ground Coffee

Page 7

LM SERIES IB-FINAL:Layout 2 10/13/2009 12:05 AM Page 12

C. Adding Water and Ground Coffee

1.Open the brew basket lid. For your convenience, you can lift out the removable filter basket.

2.Place a MR. COFFEE® brand 10-12 cup paper basket-style filter or a MR. COFFEE® permanent filter into the removable filter basket (Figure 5).

NOTE: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket and adding ground coffee and water.

FIGURE 5

3.Add the desired amount of coffee and gently shake to level the coffee. See the Suggested Coffee Measurement Chart.

4.After following instructions in the Water Filtration System, place the MR. COFFEE® water filter in the basket, making sure that the side marked “this side up” faces you and that the water filter is level.

5.Be sure the removable filter basket is properly centered and all the way down in the brew basket and close the lid.

6.Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5 ounces) For easy and accurate filling, the water markings on the glass decanter and on the dual water windows show the amount of water needed to make the corresponding desired number of cups. Do not fill past the “12 cup MAX line” or water will flow out of the overfill hole in the back of the coffeemaker.

The amount of coffee brewed will always be slightly less than the amount of water poured in the water reservoir. This is due to the minimum absorption of water by

the coffee grounds.

7.Lift the pour through reservoir lid and pour the water into the water reservoir. Close the lid and place the empty decanter onto the warmer plate.

NOTE: Make sure the decanter is fully placed on the warming plate or the water and the grounds will overflow from the filter basket. An overflow may cause personal injury or damage to property.

CAUTION! To reduce the risk of damaging the decanter and/or the risk of personal injury, do not add cold water to the decanter if the decanter is already hot. Allow the decanter to cool before using.

BREWING COFFEE NOW

1.After completing the steps in the Adding Water and Coffee section and with the glass decanter and the filter basket securely in place, turn the coffeemaker on by pressing the BREW NOW button once. The BREW NOW blue light will turn on to signal that the coffeemaker is on and brewing (Figure 6).

2.To enjoy a more full flavored cup of coffee, press the Brew Strength button once. The STRONG Brew Strength amber light will turn on. The coffeemaker will remain in the Brew Strength you have selected until you change it back to REGULAR strength by pressing the Brew Strength button or until you unplug the machine (Figure 7).

3.After the used coffee grounds have cooled, carefully remove the filter basket and discard them.

NOTE: The shower head cover is hot after brewing. Always allow the coffeemaker to cool down before cleaning.

FIGURE 6

FIGURE 7

12

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual del Usuario Decanter USE and Care IntroductionSpecial Cord SET Instructions Parts Diagram Programmable Controls Brewing CapacityNot included with all models To Set the Clock Setting the Clock and Delay Brew TimeClean Your Coffeemaker Before Using the First Time To Set the Delay Brew TimeWater Filtration System Suggested Coffee Measurement ChartPreparing for USE Selecting and Measuring Ground CoffeeAdding Water and Ground Coffee Brewing Coffee NOWWater and Ground Coffee section Described in Setting the Clock and the Delay BrewFresh Brew Timer Feature Brewing Coffee LaterDaily Cleaning Cleaning and Maintaining Your CoffeemakerFilter basket is not There’s a power outageAppliance is unplugged Water reservoir is emptyWarranty Information Service and MaintenanceYear Limited Warranty Remover partes y antes de limpiar la unidad Advertencias DE SeguridadCubiertas para dar servicio a la unidad. No hay piezas Instrucciones Especiales Sobre EL Cordel Eléctrico Conserve Estas InstruccionesIntroducción USO Y Cuidado DE LA JarraNo están incluidos con todos los modelos Cubierta de la Regadera Tanque de AguaVentanilla del Nivel de Agua Plato Calefactor Jarra Tapa para Verter del Tanque de AguaControles Programables Características Y Beneficios DE LA CafeteraLimpie SU Cafetera Antes DE Utilizarla POR Primera VEZ Brewing CapacityTabla de Medidas de Café Sugeridas Para Programar el Período de Demora del ColadoPara Colar Café Molido Cucharada rasa cda. = 5 gr./0.17 ozMarco Disco de Filtro Cubierta del Sistema de Filtración de AguaAñadiendo Agua y Café Molido Función del Contador Regresivo del Colado Colando Café AhoraAdvertencia La luz azul de Brew Colar Colando Café Luego Para cancelar Demora DEL ColadoCómo Lavar la Jarra Reemplazo del Disco de Filtración de AguaProblema Causa Posible Solución Reparaciones Servicio Y MantenimientoPiezas de Repuesto En los EE.UU. o al 1-800-667-8623 en el Canadá

SPR-101006 specifications

The Mr. Coffee SPR-101006 is a versatile and user-friendly single-serve coffee maker designed to provide a great brewing experience for coffee lovers. This compact machine stands out for its blend of modern technology, ease of use, and practical features, making it a popular choice for both casual drinkers and home baristas.

One of the main features of the SPR-101006 is its one-touch brewing system. With just a push of a button, users can easily brew their favorite coffee blend without any complicated settings. This simplicity extends to its design with a sleek and compact footprint, allowing it to fit neatly on any kitchen counter or workspace, and making it ideal for small kitchens, dorm rooms, or even office use.

The machine is compatible with a wide variety of coffee pods, giving users flexibility in their choices. Whether one prefers the classic taste of traditional coffee or wants to experiment with flavored or specialty pods, the SPR-101006 accommodates all. Additionally, it features a built-in drip tray that catches any spills, ensuring easy cleanup and maintenance.

Temperature control is another highlight of the SPR-101006. It brews coffee at an optimal temperature to extract maximum flavor, providing a rich and satisfying cup every time. The brewing time is also impressively quick, reducing the wait time for that much-coveted morning cup.

The water reservoir in the Mr. Coffee SPR-101006 is designed for convenience. It has a clear window for easy visibility, so users can see when it needs to be filled without any guesswork. Moreover, the machine is equipped with a programmable timer, allowing for personalized brewing schedules, so coffee enthusiasts can wake up to the enticing aroma of freshly brewed coffee.

Energy efficiency is a key consideration in the design of the SPR-101006, as it incorporates an automatic shut-off feature that kicks in after the last brew cycle. This not only conserves energy but also offers peace of mind, especially for those who might forget to turn off their appliances.

In conclusion, the Mr. Coffee SPR-101006 is a highly functional coffee maker that combines elegance, practicality, and advanced technology to enhance the coffee brewing experience. Its user-friendly features, compatibility with various coffee pods, and efficient brewing process make it a must-have for anyone seeking a quick and delicious cup of coffee at home.
Top Page Image Contents