System Guide
To connect a system with analog devices
1.Connect the SDI In on the Intergraph StudioZ card to the Video Out on the analog VCR via a A/D converter.
2.Connect SDI Out on the Intergraph StudioZ card to the Video In on the analog VCR via a D/A converter.
3.Connect Comp Out port on the Intergraph StudioZ card to the Video in on the analog video monitor.
4.Set the VCR transport switch to Remote.
5.Connect the COM 1 port on your base unit to the REMOTE IN port on the VCR using the pipeline cable supplied.You should not substitute the pipeline cable with any other cable but, you can extend the RS422 end with other cables if required.
6.Connect the Ref In on the Intergraph StudioZ card to the House Sync.
House Sync | Ref |
|
| SDI |
| OUT |
| SDI |
| COMP |
| OUT |
| Y/C |
ADC | DAC |
Analog VCR | |
Oscilloscope
Video connections for analog peripheral devices
System Guide
Page
System Guide
Part No. DHA025600
Warranties and Liabilities
Restricted Rights Legend
FCC / DOC Compliance
System Guide
Contents
System Guide
Space Requirements
Site Preparation
Site Requirements
Hardware Component Dimensions inches Dimensions cm
Choosing a Location for Your System
Software and Documentation
Package Contents
Hardware
Document Description
Softimageds
Reference Documentation
Carl Siechert Microsoft Press, Redmond, WA
Additional Peripherals
Cables
Input/Output Description
Inputs and Outputs
Following table describes the system inputs and outputs
Connecting the Hardware
Back Panel Overview
Softimageds environment
Slot Function Card
Video in a Window Card
Array Controllers
Graphics Card
Audio Card
Wacom tablet
Connecting
Keyboard, Mouse
Connecting the Computer Monitors
Video Connections
To connect a system with analog devices
Audio Connections
Attaching
Software Protection
Key
Moving the System
Starting Softimageds
New Project dialog box is displayed
System Hardware Overview
Intergraph StudioZ for
Intergraph StudioZ SDI and Associated cards
Slot Card Function
Record
Signal Flow
Capture
Drive Label Size Function Format
Scsi Disk Subsystem
Transfer is accelerated
System Administration
Directories Installed
On Your System
These are the directories that are created
Presets Directory
DS Projects Directory
Video Storage Directory
Audio Storage Directory
Managing User
Accounts
How Softimageds Uses User Accounts
Managing User Accounts
User Manager dialog box, select an account
After you confirm, the selected account is deleted
Rebuilding the System
To adjust the display settings
Installing the Audio
Driver
Welcome to the Antex Driver Setup dialog box, click Continue
Sample Clock box, select the following digital settings
Testing the Antex Hardware
Programs
Windows NT control panel, double-click the Multemedia icon
Installing the SDI
Intergraph workstation
Rebuilding the System
Window Driver
Installing the Video
Installing the Mouse
To install the Wacom driver
To configure the Wacom driver
Rebuilding the System
Software Protection Key
License File
SRB01478 9623L33019 FLEXID=7-B2850E81
Installing
Softimageds setup program lets you add or remove selected
That the Windows NT task bar is set to auto-hide mode
Corrupted, or remove all of Softimageds
Installing Softimageds
Component Description Complete Compact Installation
Removing Softimageds
Included
To install Softimageds
Rebuilding the System
Select the files that you want to add or remove
Reinstalling Softimageds
Adding or Removing Software Components
Installation Troubleshooting
An MS-DOS window, type the following
System Guide
Cabling Diagrams
System Guide
Cabling for Digital Peripheral Devices
Cabling for Analog Peripheral Devices
Index
Index