Century HES80 Clearance to Combustibles, Hearth, Electric Specifications, Electrical Connection

Page 5

Clearance to Combustibles

Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2” (51 mm) Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . .6” (153 mm) Floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0” (0 mm) Top . . . . . . . . . . . . . . . . . . . . . . . . . . . .24” (610 mm)

Hearth

A hearth is not mandatory, but is recommended for aesthetic purposes. We recommend a noncombustible hearth which does not obstruct heater openings.

Electric Specifications

Voltage . . . . . . . . . . . . . . . . . . . . . . . .120V AC/60Hz

Total Amps . . . . . . . . . . . . . . . . . . . . . . .12.20 Amps

Total Watts . . . . . . . . . . . . . . . . . . . . . . . .1460 Watts

Heater Ratings . . . . . . . . . . . . . . . . . . . .1300 Watts

Electrical Connection

A 15 Amp, 120 Volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the appliance will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation.

The unit comes standard with a 6’ (1.8m) long three wire cord, exiting from the rear of the stove. Plan the installation to avoid the use of an extension cord. If an extension cord must be used, it must be a minimum 14AWG, three wire with grounding type plug connector and rated not less than 1875 Watts. The cord shall not be more than 20’ (6m) in length.

WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons.

WARNING: Do not use this stove if any part of it has been under water. Immediately call a qualified service tech- nician to inspect the stove and replace any part of the electrical system.

Fan Kit Installation

When installed, the heater must be elec- trically connected and grounded in accor- dance with local codes, or in th absence of local codes, with ANSI/NFPA No. 70.

NOTE: 110/120 electric power is required to operate blower (fan).

Be sure to leave sufficient excess wire in case minor adjustments are required.

Any electrical re-wiring of this fan must be done by a qualified electrician.

Turn off all power before installation.

CAUTION: Be careful not to touch or bend the flame generator.

1.Remove panel from back of pedestal

2.Install the fan through the opening at the back of the pedestal. Place fan assembly as far forward as possible, inserting long flange through slot in front panel. (Fig. 1)

Slot

ST824

Fig. 1 Insert flange through slot in front panel.

3.Use two screws provided to secure fan assembly to base of pedestal. (Fig. 2)

4.From front of unit, attach brass handle to front of fan assembly flange. (Fig. 3)

5.Plug in grounded service cord to a convenient wall receptacle.

6.Replace rear panel in pedestal.

S190006

5

Image 5
Contents Banff Table of Contents Locating Your Stove Installation Instructions GeneralStove Dimensions Fan Kit Installation Electric SpecificationsClearance to Combustibles HearthReplacing Light Bulbs Service InstructionsMaintenance of Motors Main On/Off Switch Electrical Wiring DiagramOperating Instructions Heater ControlYear Warranty

HES80 specifications

The Century HES80 is an advanced solution in the realm of high-efficiency systems, specially designed for residential and light commercial applications. This innovative unit stands out for its ability to deliver optimal performance while maximizing energy savings, making it a popular choice among environmentally conscious consumers.

One of the HES80's main features is its impressive energy efficiency rating. It boasts an energy efficiency ratio (EER) that significantly exceeds industry standards, providing users with lower utility bills and a reduced carbon footprint. This is primarily due to its cutting-edge inverter technology, which allows the unit to adjust its power consumption based on real-time demand, ensuring that energy is not wasted.

In terms of design, the Century HES80 has a sleek and compact profile, making it easy to install in various spaces without compromising aesthetic appeal. The unit is engineered with high-quality materials, offering durability and reliability that customers have come to trust. The modern design is complemented by a quiet operation feature, which minimizes noise levels, allowing for comfortable use in homes or workplaces.

The HES80 is also equipped with a state-of-the-art digital thermostat that enables precise temperature control. This smart thermostat allows users to program their heating and cooling settings based on their schedules, enhancing convenience while maintaining comfort. Moreover, the unit features Wi-Fi connectivity, which can be integrated with smart home systems. Users can manage their indoor environment remotely via a mobile app, providing flexibility and control at their fingertips.

Another noteworthy characteristic of the HES80 is its versatile compatibility with various heating methods, including electric, gas, or heat pump systems. This adaptability ensures that consumers can use the system in diverse settings, enhancing its appeal across different markets.

Safety is a paramount consideration for the Century HES80. The unit is equipped with multiple safety features, including overheat protection and a robust fire prevention system, ensuring that it operates safely and efficiently, minimizing any risk of hazards.

In conclusion, the Century HES80 stands as a benchmark for energy-efficient heating and cooling systems. With its advanced technologies, user-friendly features, and exceptional safety measures, it represents a leading choice for anyone looking to invest in a high-performance HVAC solution.