Reversing Conveyor Direction

All ovens leaving our plant are wired to operate conveyors from left to right. To reverse conveyor direction, use the following procedure.

1.Shut off power at oven switch.

2.Set conveyor reversing switch in the other position.

3.Turn oven “on” and check for proper operation.

MAIN ORIFICE - REPLACEMENT

1.Shut off power at main breaker.

2.Remove control panel top and front panel.

3.Remove gas control valve assy.

4.Remove two (2) nuts from burner orifice bracket.

5.Disconnect pipe union.

6.Remove assembly and replace main orifice.

7.Reassemble in reverse order and check system operation. NOTE: Check all gas line fittings for leaks.

PILOT ORIFICE - REPLACEMENT

1.Shut off power at main breaker.

2.Shut off gas supply.

3.Remove burner assembly (See "Burner Assembly").

4.Remove pilot line from pilot orifice.

5.Remove pilot orifice from burner ignitor.

6.Reassemble in reverse order. NOTE: Check all gas line fittings for leaks.

ON-OFF SWITCH - REPLACEMENT

1.Shut off power at main breaker.

2.Remove control box cover.

3.Remove access cover.

4.Depress spring clips on side of switch and push out.

5.Remove wires from back of switch, note wire number and location.

6.Reassemble in reverse order and check system operation.

NOTE: Make sure switch housing is fully seated in control box housing.

OVEN CONTROL – REPLACEMENT

A.Shut off power at main breaker.

B.Remove control box cover and front panel.

C.Remove all wiring connections and mark for reassembly.

D.Remove oven control by pulling control from the mounting pins. Remove control from oven.

E.Before installing new oven control, set voltage jumper (located at the bottom center of the oven control) to the proper voltage (120V/240V) position. Install the four pushbutton extensions (included with the oven control) by pushing the extensions onto the four set buttons on control.

F.Reassemble in reverse order and check system operation.

G.Set the oven control for the proper operating mode. The 1400 series ovens use a single temperature control system. The oven control must be set to the proper operating mode. Set the control as follows: With the oven power switch “off”, depress the “time” and “up” buttons and turn the oven “on”. Control will indicate “Imp I or Imp II” Release the buttons, The control will indicate “Temp to store”. Press the “up” or “down” button until “Imp I” appears on the display. Press the “temp” button. The control is now set for single burner operation.

FUSE HOLDER – REPLACEMENT

1.Shut off power at main breaker.

2.Remove control box cover.

3.Remove all wiring from fuse holder and mark for reassembly.

4.Remove mounting nut for fuse holder and remove fuse holder.

5.Reassemble in reverse order and check system operation.

12	Impinger I – 1450 Series Service Manual - Domestic

1451, 1450 specifications

The Cub Cadet 1450 and 1451 are part of Cub Cadet's renowned line of garden tractors, providing exceptional performance and durability for homeowners and professionals alike. These models have garnered attention for their robust engineering, making them suitable for various lawn care tasks, from mowing to hauling and tilling.

One of the main features of the Cub Cadet 1450 and 1451 is their powerful engine. Both models are equipped with a reliable Kohler K-Series engine, which delivers smooth operation and a significant amount of torque, ensuring that users can tackle tough terrain and challenging mowing conditions. The engines are designed with an emphasis on longevity and easy maintenance, offering owners peace of mind and an efficient performance.

Another significant characteristic is the hydrostatic transmission system found in these tractors. This technology allows for seamless speed adjustments without the need for manual gear shifting, providing a more comfortable and user-friendly experience. Operators can easily maneuver through their yards or properties, making quick turns and adapting to different areas of their lawns with ease.

The cutting decks on both the Cub Cadet 1450 and 1451 are engineered for precision. Featuring a 50-inch cutting width, the decks allow for efficient mowing of large areas, reducing the time spent on lawn care. The innovative design also includes adjustable cutting heights, giving users the flexibility to maintain their lawns at the desired length. The robust construction of the decks ensures that they can withstand the rigors of regular use.

In addition to their impressive mowing capabilities, these models come equipped with a range of accessories and options. From attachments like snow blowers to tillers, users can expand the functionality of their tractors throughout the year. This versatility makes the Cub Cadet 1450 and 1451 ideal for various landscaping projects and seasonal tasks, including snow removal and garden preparation.

Comfort and ease of operation are further enhanced by the ergonomic design of the operator station. Both models feature a high-back seat, easy-to-reach controls, and adequate legroom, making long hours of operation more enjoyable. The intuitive dashboard provides important information at a glance, allowing users to monitor their tractor's performance without distraction.

Overall, the Cub Cadet 1450 and 1451 are reliable, powerful, and versatile garden tractors that can meet the needs of any homeowner or landscape professional. Their cutting-edge technology and robust design ensure they stand out in the competitive market of lawn care equipment, making them excellent investments for long-term yard maintenance. Whether tackling large mowing jobs or completing seasonal tasks, these tractors deliver an optimal balance of performance and comfort.