ADIC 4.3 manual Run checkDBAll and validate that no errors exist

Continue modifying all _5 names to _4 (there should be 17 of them for fs1.ddl file and 14

in the fs5.ddl file).

Step 13. Run both ddlp fs1.ddl and ddlp fs5.ddl commands to generate fs1_#.dbd and fs1_#.dbd files. Be sure to skip the fs5_#.dbd files if the corresponding fs5_#.dbd.old file did not exist in Step 9.

Step 14. Repeat Step 12. and Step 13. for all the numbers obtained in Step 11.

Step 15. Run $FS_HOME/util/buildtaf -i.At the prompt, type D to do it.

Step 16. Start lockmgr: lm_start.

Step 17. Run checkDBAll and validate that no errors exist.

Page 14 of 22 FileServ Version 4.3—600726 Rev A www.adic.com