Bushnell 364000 manual How to Set Up the Info Boxes, Map

exploring the pages : Options And Settings

Fig 7. MAP Page

Nav Info Box Options

(for upper boxes)

Fig 8. MAP Page

Info Box

Options -List #1 (for lower boxes)

Upper Info Boxes

			Lower Info Boxes
			(0 ~ 4, set by user)
	Fig 9. MAP Page
	4 Info Boxes After
12		Set Up and Exit

the top of the screen) allow you to keep an eye at all times on a wide variety of information, all user selectable-they let you to “customize” your Page displays. Take a moment to explore the Info Boxes by following the steps below:

	Fig. 8a
	Nav tab
How to Set Up the Info Boxes	selected

1.Go to the MAP Page if you are not already there (this example will use the MAP Page as a starting point, but Info Boxes are available on other Pages as well).

2.Hold the MENU button for 2 sec. You will see 4 “tabs” pop up above the lower set of Info Boxes: Nav, Weather, Sports, XM. Select the “Nav” tab by using LEFT/RIGHT (on 5-way pad) to highlight it (see Fig. 8a above) if necessary.

3.Press DOWN to select (highlight) the first Info Box in the lower set.

4.Press OK to see a list of the different types of information available to display in the Info Box. Press RIGHT to see a second list of info to choose from (then LEFT to return to the first list).

5.Use UP/DOWN buttons to highlight one (for example, Local “Time” from the 2nd list) (Fig. 8), then press OK to checkmark it. The first Info

Box will change to display the local time-your selection has replaced the previous type of info.

6.Press DOWN to select the second Info Box and repeat steps 4 & 5 to change what is displayed in this box. Repeat the process again if you like for the third box. Note that if you choose “Location” (your latitude/ longitude) for one of your info boxes, it will automatically fill 2 Info

Boxes (latitude is the top box).

7.You may have noticed that there is an option at the top of the first list of information types labeled “No Information”. You may select this option for any of the Info Boxes if you prefer not to use one or more of them-as selecting “No Information” will actually clear and remove that Info Box “slot” from the lower set of boxes. You can reduce the “stack” of three boxes you start with to just two, one or even zero. You can also press DOWN to step below the third box, where you will find that a fourth box is “hidden” because “No Information” is selected for display there. Simply select something else, and you can have up to a maximum of 4 Info Boxes in the lower part of your Map screen (Fig. 9).

8.Once you have set up the lower Info Boxes with a few different types of Nav data, press EXIT to leave the Info Box setup process and return to normal display. The info you chose will still be displayed in the boxes.

ONIX400 1LIM QS Guide-Feb08 Revi12 12 2/20/08 8:56:01 PM