Movements nr 38 and 39 (Decounter coffee and chocolate)
The movements nr38 (decounter coffee) and nr39 (decounter chocolate), where inserted, decrease the relative decounter by a unit.
To set the value of the decounter, it is enough to change it in one selection which contains it, automatically it will be modified also in all the other selections.
If the parameter “type” is set=0, every time it is reset, see at page 22, the decoun- ter restart to the set value, while if the parameter “type” is set=1, at every reset, the decounter value will be the sum of the set value plus the value before the reset.
Example with value= 100 and type=0
If the decounter is reset when its value was 20, the new decounter value is 100.
Example with value=100 and type=1
If the decounter is reset when its value was 20, the new decounter value is 120 (100+20).
In both of cases, when the decounter reaches 0, the display will show “Machine ready coffee finished” or “Machine ready choco f inished” or “Machine ready No coffee&choco” and the machine will disable the selections which contains the relative decounter (movements 38 and 39).
OPERATING
After have followed all the instructions of installation, it is possible to turn on the machine through the light switch situated on the rear side.
At the switch on of the machine, it appears on display for a brief time the message of the version software, after that it will begin the heating of the boiler that will be visualized with the message “ HEATING” that will be replaced, to reached tem- perature, by the flowing message “. …. INSERT THE CREDIT AND SELECT
YOUR DRINK…”.
Note: it is advisable to execute a manual washing immediately after the switch on, to load with more facility the hydraulic circuit and the boiler. To do this, make reference to the “QUICK FUNCTIONS” at page 27.
Drink choice
The choice of the drink happens through the composition of a numerical code that corresponds to the desired drink.
The codes and the relative associations can be varied in base to the demands of the consumer.
Sugar choice
The choice happens after the selection of the drink and within 5 seconds, through the keys A and B; during the choice on display it will appear “CHOOSE SUGAR” that it will disappear once selected.
The functions of the 2 keys and the supply by default of the sugar depend on the setting of the parameter " Default Bitter Drink" described at page 20.
The quantities of the sugar are programmable for every single drink, while the
Change of language
It is possible to change the language of visualization among those present in the version.
Pressing the key D, the language changes and it will be hold on for a maximum of 10 sec, after this time it will return to be that programmed by default.
This function is useful in those places where the users speak different languages (airports, stations, etc)
Pag. 26 | Pag. 7 |