Hyundai MWEGH 281S manual Pre-set Function, Speedy Cooking, Defrost by Weight, Auto Menu

9) Pre-set Function

1)Set the clock first. (Consult the instruction of clock setting.)

2)Input the cooking program. Three stages can be set at most.

Defrosting should not be set in preset function.Auto menu can be set single stage only. Example: if you want to cook with 80% microwave power for 7 minutes.

-Press “MICROWAVE“ once;

-Turn ”” to choose 80% microwave power till “P80“ display;

-Press “MICROWAVE“ to confirm;

-Turn ”” to adjust the cooking time of 7 minutes;

After the above steps, please do not press “START/QUICK COOK“. Then do as following:

3)Press ”CLOCK/PRE-SET”, current time displays and the hour figures flash.

4)Turn ”” to adjust the hour figures, the input time should be within 0 - 23.

5)Press ”CLOCK/PRE-SET”, the minute figures will flash.

6)Turn ”” to adjust the minute figures, the input time should be within 0 - 59.

7)Press ”START/QUICK COOK” to finish setting. ”:“ will light, buzzer will ring twice when the time arrives, then cooking will start automatically.

Note: clock must be set first. Otherwise,pre-set function will not work.

10) Speedy Cooking

1)In waiting state, press „START/QUICK COOK“ key to cook with 100% power level for 1 minute. Each press on the same key can increase 1 minute.

The maximum cooking time is 95 minutes.

Note: this function cannot work under defrost, auto menu and multi - stage cooking.

11) Defrost by Weight

1)Press “DEFROST“ pad once,the oven will display “dEF1“.

2)Turn ”” to select the weight of food.At the same time, “g“ will lights. The weight should be 100 - 2000g.

3)Press “START/QUICK COOK“ key to start defrosting.

12) Auto Menu

1)Press “AUTO MENU“, “A - 1“ displays.

2)Turn ”” right to choose the function wanted, and “A - 1“, “A - 2“, “A - 3“....“A - 9“ will be displayed.

3)Press “AUTO MENU“ to confirm the menu you need.

Note:If the selected menu is A - 3, “P - 1“ displays. Turn „ „ to choose “P - 1“,“P - 2“, “P - 3“....“P - 8“.Then press “AUTO MENU“ to confirm.

4)Turn ”” to choose the weight of menu,and „g“ indicator will light.

If the selected menu is A - 3, at this time, press “AUTO MENU“ to choose the time of half pipe.

5)Press “START/QUICK COOK“ to start cooking.

EN - 54