Heath Zenith AC-6507 manual Code and Tune Settings, Code Settings

Page 4

Code and Tune Settings

Code Settings

Note: Most installations will not require you to change any of the jumpers on your doorbell.

The transmitter and chime communicate by using a code that can be changed by removing and/or adding jumpers on both the transmitter and chime. The code is factory set; however, there are 128 selectable codes that allow you to expand your system and prevent outside interference. Another wireless doorbell system or other wireless products may cause interference and the system may not function properly. Follow the instructions below for setting a new code.

1.Disconnect the power to the transmitter and chime.

2.Open the cases and locate the jumpers on both the transmitter and chime (See illustration).

3.The transmitter and chime both have eight different jumper locations.The jumper positions 1 through 7 are used for setting the code.

4.To change the code, add and/or remove jumpers as needed. There are 128 dif- ferent combinations. It is recommended to only change one jumper at a time and then check to see if system is functioning properly. Note: Jumpers in positions 1 through 7 must be exactly the same for both the transmitter and chime for this system to function.

- -

598-1150-01

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Install batteries in transmitter and chime Wireless Chime withChime Extender Jumpers Battery Orientation Volume ControlInstall Extension Transmitter Keyholes6a Mount with Double Sided Tape Install Chime6b Mount with Screws and Hollow-Wall Fasteners Code and Tune Settings Code SettingsTune Setting Tune SettingsInside Troubleshooting Technical ServiceNo Service Parts Available for this Product Chime does not soundTWO Year Limited Warranty Regulatory InformationInstale las baterías en el transmisor y la campana Puentes Botón de pruebaControl Del Volumen AgujerosPuentes Orientación de la batería Ranura guía del alambre Micrófono6a Montaje con cinta adhesiva a los dos lados 6b Montaje con tornillos y sujetadores para pared huecaProgramaciones del código y del tono Instalación de la campanaCambio de pila del transmisor Programación del tonoProgramación Del tono Análisis de Averías Servicio TécnicoLa campana no suena La campana suena cuando hay ruidos altosInformación Regulatoria Garantía Limitada a 2 AñosInstallez les piles dans l’émetteur et dans le carillon Module prolongateurCommande Installation de l’émetteur de prolongateurOrifices allongés Cavaliers Sens des Piles6a Montage avec ruban à deux faces adhésives Installez le carillon6b Montage avec vis et ancrages pour murs creux Réglages du code et de la mélodie Réglages du codeRéglage de La mélodie Réglage de la mélodieIntérieur de Réglage de la Mélodie Lémetteur Le carillon ne sonne pas DépannageDéclenchement intempestif du carillon par les forts bruits Renseignements de règlements Service TechniqueAucune pièce de rechange n’est disponible pour ce produit Garantie Limitée DE 2 ANS 598-1150-01 598-1150-01

AC-6507 specifications

The Heath Zenith AC-6507 is an advanced solar-powered outdoor security light that combines functionality and cutting-edge technology to enhance safety and convenience around your home. This model represents an innovative approach to outdoor lighting, providing a reliable solution for illuminating pathways, driveways, gardens, and other outdoor areas.

One of the standout features of the AC-6507 is its solar power capability. This means that the unit is equipped with solar panels that capture sunlight during the day and convert it into energy to power the light at night. The use of solar energy not only contributes to reducing electricity costs but also makes the product environmentally friendly. With a fully charged battery, the light can provide illumination for several hours, ensuring that your outdoor spaces remain well-lit even in extended evenings.

The AC-6507 is designed with adjustable brightness settings and a motion detection feature, which helps conserve energy and extend battery life. The motion sensor is capable of detecting movement within a certain range, instantly triggering the light to illuminate brightly when someone approaches. This feature not only deters potential intruders but also provides a welcoming light when you return home at night.

Moreover, the unit is built to withstand the elements, with a durable and weather-resistant design that ensures reliable performance in various climates. Made with high-quality materials, the AC-6507 can endure rain, snow, and heat, making it suitable for year-round use. Additionally, the light is easy to install, requiring no complicated wiring or electrical work. Users can conveniently mount it on walls, poles, or fences to achieve optimal lighting coverage.

Another characteristic that makes the AC-6507 appealing is its sleek and modern aesthetic. Its design seamlessly blends into any outdoor décor, allowing it to enhance the visual appeal of your property while providing essential lighting.

In summary, the Heath Zenith AC-6507 solar-powered outdoor security light stands out for its energy-efficient design, robust features, ease of installation, and versatile applications. With the integration of motion sensor technology, adjustable brightness levels, and a durable build, it offers a practical and stylish solution for enhancing outdoor safety and visibility.
Top Page Image Contents