Specifications
Frequency Response: | 20 Hz – 20 kHz (L, C, R, Rs, Cs, Ls); |
| 20 Hz to 80 Hz (LFE) |
Inputs (Digital only): | 1 balanced XLR (Lt/Rt); input level per AES3 standards |
Input Impedance: | 110 Ω |
Outputs: | 4 balanced XLRs (L/R, C/LFE, Ls/Rs, Cs); output levels |
| per AES3 standards |
Output Impedance: | 110 Ω |
Sample Rates: | 44.1 kHz or 48 kHz (locked to input sync source sample |
| frequency) |
Decoding Latency: | <8.2 ms |
Processing: | SRS – Circle Surround II Decoding algorithm with multi- |
Front Panel Indicators/Controls: | band steering on ADI DSP |
Input signal presence @ | |
| channel); Clip indicator @ 0 dBFS |
| Sync Source Selector – AES Pair 1/AES11 Clock & |
| status LEDs |
| Sample Rate Indicator – 44.1kHz/48kHZ status LEDs |
| Center Mode Selector – Discrete/Phantom & status LEDs |
| Monitor mode selector – Lt/Rt (CS Cinema, CS |
| Discrete Compare and LCRS switching using Lt/Rt |
| selector below), Stereo (Stereo and CS Music), Mono |
| (Mono and CS Mono) and Test (Pink noise cycled |
| through channels @ |
| Lt/Rt Mode Selector – LCRS / Circle Surround Cinema |
| / Circle Surround Discrete Compare & status LEDs |
| Output signal presence @ |
| channel); Clip indicator @ 0 dBFS |
Power Requirements: | |
Power Consumption: | 8 W |
Dimensions: | Rack mount; 1 ru (1.75” x 19” x 12”) |
Weight: | 5 lbs. 7 oz. |
Recommended Cable: | Double Shielded (Foil/Braid) AES/EBU cable. Nominal |
| impedance 110 Ω (Ex. Belden 1696A) |
Note: 0 dBu = 0.775 Vrms |
|
(Specifications subject to change without notice) |
|
13