Let the Magic Begin Fast, Choose | Keurig 60-200258-037 instruction

b06739_QuickStartInsert_B60 5/2/05 4:57 PM Page 1

KEURIG® Quick Start Guide

Premium Coffee Systems

Let the Magic Begin FAST!

Thank you for purchasing a Keurig® Special Edition - Model B60 Gourmet Single Cup Home Brewing System.

IMPORTANT: You cannot use your Keurig Brewer until it has been primed for its first use as set forth below. Please follow these easy steps and you will discover what Deliciously Simple™ truly means.

Please note, if your Brewer has been exposed to temperatures below freezing, it is recommended you allow two hours for an unpacked brewer to warm to room temperature before priming or brewing.

1. Unpacking the Special Edition - Model B60 Brewer

a. Carefully remove the Brewer by placing the box on its side, and pulling the Brewer out of the box and removing the protective materials.

b. Place the Brewer upright on a flat surface. Remove three pieces of adhesive tape from Brewer.

c. Unwrap cord and plug Brewer into a grounded outlet.

2. Priming

a. Place a cup or mug on the Drip Tray Plate.

b. Remove the Water Reservoir from the Brewer by first removing the Lid from the Water Reservoir, then lifting the Water Reservoir straight up and away from the Brewer. Rinse and fill with cold water. Replace the Water Reservoir back on the Brewer and replace the Lid.

c. Press the Power Button to turn the Brewer on and the blue light in the Water Reservoir and LCD Control Center will become illuminated.

d. The LCD Control Center will indicate ‘PRIME’ and

the Travel Mug button will flash. Please note, a K-Cup®portion pack should not be used for the Priming Sequence.

Power Button

PRIME

Travel Mug

Button

e. Press the flashing blue Travel Mug button.

f. The Brewer will automatically fill (priming it) and then the water will be heated. This will take about 3 minutes. During the heating period the ‘NOT READY’ indicator will be on. When the water is heated ‘READY’ will be

displayed and the Travel Mug button will flash.

g. Press the blue Travel Mug button to start a cleans- ing brew, during which hot water will flow into your cup or mug. Pour the hot water into the sink.

h. The one-time priming process is now complete and you are ready to brew!

NOTE: The Brewer may take 15 seconds to reheat between brews and the LCD Control Center will indicate 'NOT READY'. During this time the pump may cause a vibration noise. This is normal. The LCD Control Center will indicate 'READY TO BREW' once the water has heated and the Brewer is ready.

3. Choose

a. Place a cup or mug on the Drip Tray Plate.

b. Select a K-Cup®portion pack. Do not remove the foil lid.

4. Brew

a. Lift the Handle, place the K-Cup in the K-Cup Holder Assembly and then push the Handle all the way down to puncture the K-Cup.

Please be careful to avoid the sharp needles in the K-Cup Assembly Housing & Lid.

b. Select a brew size by pressing the flashing Cup, Mug or Travel Mug button.

READY

TO BREW

	Travel Mug
MENU	Button
Cup Button
	Mug Button

NOTE: The smaller cup will brew stronger tasting coffee/tea.

Please consult the Use & Care Guide for additional information on your Brewer. If you	Part #: 60-200258-037
are experiencing problems, contact Customer Service at 1-866-901-BREW (2739).
© 2005 Keurig Incorporated	Revision A, April 2005

60-200258-037 specifications

The Keurig 60-200258-037, commonly known as the Keurig K50, is a single-serve coffee maker that epitomizes convenience and efficiency for coffee enthusiasts. With its user-friendly design, this coffee maker caters to the busy lifestyle of modern consumers who crave a delicious cup of coffee without the hassle of traditional brewing methods.

One of the primary features of the Keurig K50 is its exceptional brewing speed. Users can enjoy a fresh cup of coffee in under a minute, thanks to its innovative brewing technology. This rapid brewing process is made possible by its powerful heating element, which heats water quickly to the ideal temperature for extraction. The capacity to brew a variety of cup sizes, including 6, 8, and 10-ounce servings, allows users to personalize their coffee experience according to their preferences.

The Keurig K50 utilizes K-Cup pods, which are pre-measured coffee pods that come in an extensive range of flavors and brands. This compatibility means that users can easily switch between different coffees, teas, and other beverages without any mess or complicated setup. The convenience of these pods also eliminates the need for grinding beans or measuring coffee grounds, making it an ideal choice for those who appreciate simplicity.

Another notable characteristic of the Keurig K50 is its removable water reservoir, which holds up to 48 ounces. This feature significantly reduces the frequency of refills, as it can brew several cups before needing additional water. The reservoir is also designed for easy cleaning, promoting hygiene and longevity of the machine.

Moreover, the Keurig K50 boasts a sleek and compact design that makes it suitable for a wide range of kitchen spaces. Its drip tray can be adjusted or removed to accommodate different cup sizes, adding to its versatility.

In terms of energy efficiency, this model is equipped with an auto-off feature that activates after a set period of inactivity. This not only conserves energy but also adds an element of safety, ensuring peace of mind for users.

In summary, the Keurig 60-200258-037 or K50 serves as an excellent addition to any home or office setting. With its quick brewing capabilities, compatibility with diverse K-Cup pods, removable water reservoir, and energy-efficient features, it is designed to meet the demands of busy lifestyles while delivering a satisfying coffee experience. Whether you are a casual coffee drinker or a connoisseur, the Keurig K50 offers a hassle-free solution for your daily caffeine fix.