Decalcifying | Jura Capresso IMPRESSA E50, IMPRESSA E55 specs

Switch on machine by pressing button.

Push button for about 3 seconds. Warning lamps ,

(if necessary) , light up.

Fill water tank.

Empty drip tray and grounds container and replace them. War- ning lamps (if necessary) go out.

Place a container under the coffee-spout (9).

Put a Jura cleaning tablet (Fig. 9) into the powder funnel (10).

Press selector button . The warning lamp goes out.

Warning lamp flashes.

The flashing of warning lamp indicates that the cleaning process is activated.

If warning lamp lights up, empty drip tray (if necessary), wait about 10 seconds before replacing it. Warning lamp goes out.

Replace the container under the coffee-spout (9) and press button

The cleaning process is continued.

If warning lamp lights up again, empty drip tray (if neces- sary), wait about 10 seconds before replacing it. Warning lamp goes out.

Replace the container under the coffee-spout (9) and press button

The cleaning process is continued. At the end of it, warning lamp lights up.

Empty drip tray and grounds container and replace them.

Warning lamp lights up.

Replace container under the coffee spout (9) and press button

. The machine rinses and warning lamp lights up.

Tip: Clean powder funnel with a bottle-brush.

13. Decalcifying

Your machine has an integrated decalcifying program. If a Claris fil- ter cartridge is used there is no need for decalcifying your machine. Please use Jura decalcifying tablets only. These are available from your Jura dealer

Note: If the machine needs decalcifying warning lamp lights up. You can still draw off coffee and hot-water/steam and run the decalcifying program later.

Important: Run the decalcifying program only after the ma- chine has been switched off for at least 2 hours and has cooled down completely. The decalcifying program is started with the machine switched off. The running decalcifying program must not be interrupted.

Switch off machine by pressing button	and let the machine	E

cool down for 2 hours.

Then remove water tank.

Press button	for about 3 seconds. Warning lamps , ,
light up.

Pour 0,5 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture in- to the water tank.

Empty drip tray and replace it. Warning lamps , , ,

flash and warning lamp lights up.

Place a sufficiently big container under the pivoting nozzle (13). Turn selector switch for hot-water/steam (12) to position .

IMPRESSA E50, IMPRESSA E55 specifications

The Jura Capresso IMPRESSA E55 and IMPRESSA E50 are remarkable espresso machines that epitomize quality and innovation in the world of coffee making. Both models exemplify Jura's commitment to excellence, delivering barista-quality espresso with the convenience of an automatic machine.

One of the main features of the IMPRESSA E55 is its sophisticated brewing system, which utilizes Jura's revolutionary Pulse Extraction Process (P.E.P.). This technology optimizes the extraction time for shorter coffee specialties, ensuring that each shot of espresso is rich, aromatic, and full of flavor. The IMPRESSA E50, while slightly less advanced, shares many of the same attributes, providing a reliable brewing experience for coffee enthusiasts.

The intuitive one-touch button operation on both models makes brewing coffee as simple as pressing a button. From espresso to cappuccino, users can easily prepare a variety of specialty drinks without the need for extensive training. The IMPRESSA E55 features an integrated milk foam system, allowing users to create perfectly textured milk for their lattes and macchiatos. The E50, while lacking this specific feature, still provides exceptional coffee quality with its built-in frothing capabilities.

In terms of design, both machines boast a sleek and modern aesthetic, easily fitting into any kitchen or office setting. The high-resolution display on the E55 offers clear guidance through each step of the brewing process, while the E50 maintains a user-friendly interface. The compact size of these machines also ensures they won’t take up much counter space, making them ideal for small kitchens.

The IMPRESSA E55's advanced grinder is another notable feature, utilizing a conical burr grinder to ensure that beans are ground to the ideal consistency for extraction. The E50 also has a robust grinder, ensuring that coffee is freshly ground for every brew, enhancing the overall flavor profile.

Both models are equipped with Jura’s Intelligent Pre-Brew Aroma System (P.E.P.A.) that ensures optimal aroma development. This is crucial for coffee aficionados who appreciate the finer nuances of freshly brewed coffee.

Lastly, both machines come with easy-to-clean systems, including automatic rinsing programs, making maintenance a breeze. This feature is essential for busy coffee lovers who want the best without the hassle of complicated upkeep.

In summary, the Jura Capresso IMPRESSA E55 and E50 offer exceptional features, advanced technologies, and user-friendly characteristics. These machines are designed for anyone who desires the perfect coffee experience at home or in the office, making them standout choices in the premium coffee machine market.