Jura Capresso Comprehensive Cleaning and Decalcifying Instructions for Jura Impressa Espresso Machines

Page 24

Once started, the cleaning process must not be interrupted.

After each cleaning process, the filler funnel for the pre- ground coffee (17) should be cleaned as well.

 SELECT PRODUCT CLEAN MACHINE

Press Rinse until the following message appears:

 EMPTY TRAY /

EMPTY GROUNDS

Empty out the drip tray (1) and integrated coffee grounds bin.

 TRAY

MISSING

Place the empty, clean drip tray (1) and integrated coffee grounds bin back into the IMPRESSA.

 PRESS

RINSE

Place a sufficiently large receptacle (ca. 0.5 litres) under the coffee spout (18).

Press Rinse .

 MACHINE

CLEANING

You will hear an acoustic signal.

 ADD

TABLET / PRESS RINSE

Open the lid of the filler funnel for pre-ground coffee (17). Drop an original JURA cleaning tablet inside (Fig. 12) and close the lid.

Press Rinse .

 MACHINE

CLEANING

You will hear an acoustic signal.

 EMPTY TRAY / EMPTY GROUNDS

Empty out the drip tray (1) and integrated coffee grounds bin.

 TRAY

MISSING

Place the empty, clean drip tray (1) and integrated coffee grounds bin back into the IMPRESSA.

 SELECT PRODUCT

When the cleaning program has finished, take out the removable coffee powder tank and briefly rinse it under running water.

You can also trigger a cleaning cycle manually at any point in time (see Chapter 13.3).

16. Decalcifying

The IMPRESSA features an integrated decalcifying program. The process takes approx.50 minutes.

Lime scale builds up in the IMPRESSA as a result of normal use. The degree of calcification depends on the hardness of the water you use. The IMPRESSA recognizes when you should run a decalcifying cycle. The machine will still make coffee and hot water/steam. However, we recommend that you should decalcify the machine within a few days after the message was displayed.

Please only use original JURA de-scaling tablets: their for- mula is especially tailored to JURA coffee machines. Please note that the use of unsuitable decalcifying agents may cause damage to your machine and could leave unfavourable residues in the water.

Remove any splashes or drops of the decalcifying agent from sensitive surfaces, in particular surfaces made of natural stone or wood, or take appropriate preventive measures.

24

Image 24
Contents Impressa S9/S7 avantgarde Instructions for use Jura Elektroapparate AG, CH-4626 Niederbuchsiten Page Description of the machine Contents Safety information 1.1 Warnings PrecautionsBefore you begin Checking electrical fuseAdjusting the grinding gear Power switchFilling the water tank Filling the bean tankAdjusting your machine to the water hardness Cup illuminationUsing a Claris plus filter cartridge Installing the filterChanging the filter Rinsing the machine Making coffee Espresso, 2 espressos, 1 coffee, 2 coffeesMaking coffee with pre-ground coffee powder Making coffee à la carte Making hot waterDrawing off steam Frothing milkFrothing one portion of milk with the 2-stage frothing jet Frothing milk With the 2-stage frothing jetCleaning the Professional-Cappuccino Frother and jet Switching the Impressa S9/S7 avantgarde off Draw OFF Steam Maintenance ProgrammingProgramming the filter Programming the amount of powder for coffee and espresso Powder Quantity  Water QuantityProgramming the water portion Programming the steam portion Temp  PortionEconomy mode  Economy ModeEconomy  EconomySetting the time Programming the automatic switch-on time Time  Unit onProgramming the automatic switch-off time Programming the languageProgramming the display Information Language  DisplayResetting products to factory settings Maintenance Filling the water tankEmptying the coffee grounds Prompt to run cleaning cycle Emptying the drip trayDrip tray missing Removing stones from the grinding gearGeneral cleaning instructions CleaningPrompt to decalcify Emptying the systemDecalcifying  Select Product DE-SCALE Machine  Agent in Tank Press Steam Machine DE-SCALING  Open TAPDisposal Tips for perfect coffeeProblems Problem Cause RemedyTechnical data Legal information

S7, IMPRESSA S9 specifications

The Jura Capresso IMPRESSA S9 and S7 are sophisticated automatic coffee machines designed for coffee enthusiasts who seek convenience without compromising quality. Both models boast a range of features and advanced technologies that elevate the at-home brewing experience.

One of the standout features of the IMPRESSA S9 and S7 is their patented brewing system, known as the P.E.P. (Pulse Extraction Process). This innovative technology optimizes the extraction time for espresso, allowing hot water to flow through the coffee grounds in short pulses, enhancing flavor and ensuring a rich crema. This results in a consistently excellent espresso shot every time, replicating the results of a professional barista.

Both models are equipped with a conical burr grinder with an adjustable grind setting, allowing users to customize the grind size to suit their preferred coffee beans. This grinder operates quietly and efficiently, preserving the essential oils and flavors of the coffee. With the IMPRESSA S9 and S7, users can select their desired coffee strength and volume, making it easy to create everything from a short espresso to a full cup of coffee.

Another notable aspect is the continuous steam and hot water function, which enables users to prepare a variety of milk-based drinks, such as lattes and cappuccinos. The automatic milk frother ensures that steamed milk has a velvety texture, while the integrated hot water spout is perfect for making Americanos or tea.

Both machines feature a user-friendly color display that simplifies the operation, making it easy to select beverages and customize settings. The self-cleaning program adds convenience by automating maintenance, ensuring the machine remains in excellent condition with minimal effort.

The Jura Capresso IMPRESSA series also emphasizes design and build quality. The elegant stainless steel housing gives the machines a modern and polished look, while durable components ensure longevity. Their compact design fits seamlessly into any kitchen setup, making them not only functional but also stylish.

In summary, the Jura Capresso IMPRESSA S9 and S7 set a high standard for automatic coffee machines. With features such as the Pulse Extraction Process, customizable grind settings, an automatic milk frother, and an intuitive interface, these machines cater to all coffee preferences. Whether you're a casual coffee drinker or a passionate connoisseur, both models offer an impressive blend of technology and convenience.