Jura Capresso IMPRESSA S9/S7 manual  Water Quantity,  Temperature

 NORMAL (example)

– _ _ _ +

Now turn the Rotary Switch (4) until the required amount of powder is set.

 STRONG (example)

– _ _ +

Confirm the selected setting by pressing the Rotary Switch (4).

 POWDER

QUANTITY

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.5Setting the amount of water for coffee, espresso and coffee à la carte

The system’s basic settings include pre-defined amounts of water (coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, coffee à la carte 145 ml). However, these can be modified as required.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) un- til you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 WATER

QUANTITY

Press the Rotary Switch (4) to activate the program item.

	SELECT
	PRODUCT
 Press a product key of your choice.
	1 ESPRESSO (example)
	60 ML
		E
 Turn the Rotary Switch (4) to adjust the amount of water and
	then confirm your setting by pressing the Rotary Switch (4).

 WATER QUANTITY

Turn the Rotary Switch (4) until the following message is dis- played:

 EXIT

Press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.6Programming the temperature for coffee, espresso and coffee à la carte

You can adjust the temperature for each type of coffee sepa- rately. The temperature can be set to 2 different levels (NORMAL, HIGH).

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 TEMPERATURE

Now press the Rotary Switch (4) to start programming.

 SELECT PRODUCT

Then press a product key of your choice.

15