Texas Instruments Essential Information on the CC2533 for Your Appliance Trim Kit

Page 6

swru266

4 Getting Started

4.1Development Kit Content

The development kit includes the following main components:

RF remote control

A complete cost optimized RF4CE remote control reference design with integrated PCB antenna. The remote control can be programmed using the debug interface.

Target Module

Interface board for connecting I/O signals to typical remote applications. The following interfaces are accessible:

-UART over USB virtual serial port

-UART, CMOS signal level

-SPI

-I2C

-IR receiver/transmitter

CC2533EM

This is the CC2533 Evaluation Module (EM) with the RF IC reference design. Use the EM as reference design for antenna and RF layout. To be plugged into the Receiver module. The CC2533EM module includes both a no-cost PCB antenna and an SMA connector with external antenna. The antenna can be selected with a 0-ohm resistor. The PCB antenna is used by default.

CC Debugger

USB Debug Interface for programming and debugging applications running on the remote control and target board.

For programming the CC Debugger is used with the SmartRF flash programmer SW

For In-Circuit Emulator the CC Debugger is used with the IAR embedded workbench

6/25

Image 6
Contents CC2533 RF4CE Basic Development Kit Hardware User’s Guide Table of Contents List of Figures List of TablesIntroduction About this manualAcronyms and Abbreviations Development Kit Content Getting StartedCC2533 Remote Control Remote Control Key layout Target ModuleInstalling RemoTI software and Windows drivers RemoTI SoftwareInstalling the target module Windows drivers Assembled target moduleConnecting the target module for the first time Windows XP Driver installation is completed Windows XP Testing the Remote Control application Remote control Using the SmartRF Flash Programmer PC softwareProgramming and debugging the remote control Programming and DebuggingConnecting the remote control to the CC Debugger Programming and debugging the target moduleConnecting the target module to the CC Debugger Target module hardware description EM header RemoTI target Module signalTarget Module 1 CC2533EM interfaceInterface connectors Signal name Pin #2 USB Interface header pinout Debug interface Debug Header pinout DataflashIR transmitter polarity Appendix a Opening the remote control Opening the remote control, step oneAppendix B How to upgrade the target module USB driver Short pin 1GND and pin11 SDAUsing the Eeprom burner software Schematic and Layout Document History Revision Date Description/ChangesImportant Notice

CC2533 specifications

The Texas Instruments CC2533 is a versatile System-on-Chip (SoC) designed primarily for wireless applications, particularly in the field of low-power Zigbee networking. This device is part of the CC253x family and caters to the needs of developers focusing on IoT (Internet of Things) solutions, smart home applications, and industrial automation.

One of the CC2533's standout features is its integration of a high-performance 8051 microcontroller core, which runs at speeds of up to 32 MHz. This core provides sufficient processing power for running Zigbee stack software and application code, enabling developers to build sophisticated networking solutions while maintaining low power consumption. The device incorporates up to 256 KB of flash memory and 8 KB of RAM, allowing ample space for firmware and data storage.

Key to its functionality is the CC2533's built-in enhanced 2.4 GHz transceiver, which supports Zigbee, IEEE 802.15.4, and other IEEE wireless protocols. This transceiver enables robust communication capabilities, ensuring reliable connectivity even in challenging environments. The device can operate over a wide temperature range, making it suitable for various applications, from indoor to outdoor environments.

The CC2533 features several power management modes, including Sleep and Deep Sleep modes, which help extend battery life in portable applications. Its low active and sleep current consumption is a critical advantage, enabling devices to operate for an extended time on small batteries. Additionally, the chip supports AES-128 hardware encryption, enhancing security for transmitted data, a critical requirement in today's connected devices.

The CC2533 is equipped with various peripherals, including GPIOs, timers, and a serial interface, facilitating interaction with other components. The device is compatible with the TI Zigbee software stack, which simplifies the development process by providing APIs for application development, thus enabling faster time to market.

Overall, the Texas Instruments CC2533 stands out as a feature-rich SoC, ideal for creating reliable, low-power Zigbee-based solutions. Its combination of a powerful microcontroller, integrated transceiver, advanced power management, and robust security features make it an attractive choice for developers looking to leverage IoT technologies in their projects. This makes the CC2533 a cornerstone of modern wireless communication and an essential component in the development of smart, connected devices.