Dean™®
dimensions Min./Max. Per Fryer Oil Capacity
model |
| size (mm) |
| drain | No. of | frying | shipping info |
| dimensions (mm) | |||||
no. |
|
|
|
| height | tubes | area |
|
|
|
|
|
|
|
| height | width |
| depth | (mm) |
| (cm) | weight | class | cube | height |
| width | depth |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HD63G | 45” | 20” |
| 36.5* | 12.5” | 5 | 18” x 18” | 255 lbs. | 85 | 39.7 cu. ft. | 55” |
| 29” | 43” |
| (1143) | (508) |
| (927) | (317.5) |
| (46 x 46) | (116 kg) |
|
| (1397) |
| (737) | (1092) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*without basket lifts
HD63G Series Gas Fryer Model #
CSI Section
power requirements
NATURAL OR LP GAS | GAS | ELECTRICAL |
INPUT RATING | CONNECTION | REQUIREMENT |
|
|
|
125,000 BTU/hr. | 3/4” N.P.T. | 120V/60~1ø - 3/5A |
(31,486 kCal/hr.) (36.6 kW) | regulator not required |
|
|
|
|
international voltages: 220/230/250
short term specification
Shall be DEAN cool zone, deep fat, high efficiency fryer, Model
______. Only _____” (_____cm) wide, 85 lb. (42 liters) oil capacity,
requiring 125,000 BTU/hr. (31,486 kCal/hr.) (36.6 kW) natural or LP gas input (3/4” N.P.T. connection).
NOTES:
CLEARANCE INFORMATION
A minimum of 24” (610 mm) should be provided at the front of the unit for servicing and proper operation, and 6” (152 mm) between the sides and rear of the fryer to any combustible material.
POWER CORDS: On 1 to 3 battery units, 1 power cords supplied On 4 and 5 battery units, 2 power cords supplied On 6 battery units, 3 power cords supplied
NOTE: Add 1 additional power cord for filtration.
standard accessories
•6” adjustable legs
•
•Basket hanger
•Two twin baskets or one full basket
_______________
11400
5489 Campus Drive Shreveport, LA 71129 USA
Tel:
Tel:
Fax:
http://dean.enodis.com Bulletin No.
We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.