Smart Technologies 710.0026 LED Functions, Getting Started, Using the LF Initiator

Page 4

Learn: Press this button to make a sensor transmit a ‘Learn’ transmission. Learn transmissions are used when reprogramming sensor ID numbers into the SmarTire receiver.

LED FUNCTIONS

Whenever a button is pressed, the LF Initiator Tool indicates its status by the color of its LED light.

GREEN = Working properly (approx 5 second illumination duration)

RED = Not working properly (contact SmarTire distributor for replacement)

ORANGE = Low battery voltage

GETTING STARTED

The SmarTire LF Initiator is powered by a standard 9 Volt battery. To install the battery, open the battery access panel on the back of the tool and connect the supplied battery to the 9 Volt battery connector. Insert the battery into the slot and close the battery access panel. Push the ON / OFF switch up to power the tool on and down to power it off.

USING THE LF INITIATOR

The SmarTire LF Initiator Tool is very easy to use. Simply hold it approximately 1 inch (2.5 cm) away from the tire’s surface positioned at the center of the tire’s sidewall at the location of the valve (SmarTire sensors should be installed at the valve and their location should also be indicated by a rim mounted label). Press (but do not hold down) the button and hold the tool in place for approximately 5 seconds to ensure the wireless signals emitted from the tool reach the sensor.

710.0026 R1.2

SmarTire LF Initiator Operating Instructions

4

REFERENCE ONLY

Image 4
Contents SmarTire LF Initiator Tool Revision Table of Contents Introduction OverviewLED Functions Using the LF InitiatorGetting Started Programming Sensor ID Numbers Verifying Correct Installation Warranty Policy General Limits and ExclusionsWarranty Disclaimer Limitation of LiabilityEuropean Regulations SmarTire Systems Inc SmarTire Europe Limited

710.0026 specifications

Smart Technologies 710.0026 is an innovative display solution aimed at enhancing collaboration and productivity in educational and corporate environments. Harnessing the power of advanced technology, this interactive whiteboard integrates multiple features that facilitate real-time collaboration and dynamic presentations.

One of the main features of the Smart Technologies 710.0026 is its high-definition display. With a resolution that ensures crystal-clear visuals, users can present detailed graphics, images, and text without any compromise in quality. This clarity is essential for educational institutions and businesses that require impactful presentations. The board also supports multi-touch functionality, enabling several users to interact with the display simultaneously. This feature fosters collaboration among teams and students, as they can draw, write, and manipulate objects on the screen in real time.

The Smart Technologies 710.0026 boasts a range of connection options, allowing it to seamlessly integrate with various devices such as laptops, tablets, and smartphones. It supports both wired and wireless connections, making it versatile and user-friendly. Additionally, it includes built-in software that allows for easy sharing of content, further enhancing its collaborative capabilities. This makes it an ideal tool for brainstorming sessions, workshops, and classroom environments.

Another noteworthy technology integrated into the Smart Technologies 710.0026 is its touch recognition. The display is equipped with advanced infrared technology that recognizes touch gestures with remarkable accuracy. This not only improves user experience but also eliminates the lag commonly found in traditional interactive boards.

In terms of characteristics, the Smart Technologies 710.0026 is designed with durability and usability in mind. Its sturdy construction ensures that it can withstand the rigors of a busy classroom or office space. An easy-to-clean surface is also a significant advantage, as it maintains the board's appearance and functionality over time.

Overall, the Smart Technologies 710.0026 represents a significant advancement in interactive display technology. Its combination of high-definition visuals, multi-touch capabilities, versatile connectivity, and user-friendly design makes it an invaluable asset for any environment that prioritizes collaboration and engagement. Whether in a classroom, conference room, or creative studio, this technology is poised to enhance the way we communicate and work together.