Rayburn 200SFW, 212SFW Cooker Flue Connection, Flue Layouts, No Bend Connections are Allowed

Page 5

IN ALL TYPE OF CHIMNEYS THE MINIMUM HEIGHT FOR CORRECT OPERATION OF THE CHIMNEY IS 4.5m AND SHOULD TERMINATE ABOVE THE ROOF IN ACCORDANCE WITH REGIONAL STATUTORY REQUIREMENTS RECOMMENDED FLUE DRAUGHT

-12 pa MINIMUM. THE APPLIANCE SHOULD BE INSTALLED AND CONFORM TO THE CURRENT CODES OF PRACTICE FOR INSTALLATION OF DOMESTIC HEATING AND COOKING APPLIANCES BURNING SOLID FUEL - BS 8303.

ALWAYS ADVISE THE USER TO CLEAN THE COOKER FLUES IN ACCORDANCE WITH THE OPERATING INSTRUCTIONS AND TO HAVE THE CHIMNEY SWEPT AT A MINIMUM OF 12 MONTHLY INTERVALS AFTER THE COOKER IS COMMISSIONED.

COOKER FLUE CONNECTION

The position of available types of flue layouts are shown in Figs. 2, 3 and 4, the cooker flue chamber is adaptable to providing either top or back flue outlets, by means of the reversible loose socket.

a)Rear Flue Outlet

This must only be used where there is a brick flue immediately behind the cooker. Provision must be made for a condensate collecting vessel and cleaning door. See Fig. 3.

EXTENDED HORIZONTAL FLUE PIPE CONNECTION IS ALLOWED UP TO A MAXIMUM OF 150mm IN LENGTH.

NO BEND CONNECTIONS ARE ALLOWED.

b)Top Flue Outlet

The cooker should be connected to the main flue via a 125mm minimum diameter cast iron flue pipe or appropriately internally/externally vitreous enamelled mild steel pipe and be sealed to the cooker flue chamber with soft rope and fire cement. Any bends in the flue pipe must not be less than 135º (45º from vertical) and be complete with a cleaning door.

FLUE LAYOUTS

In Fig. 2 the cooker is installed in an existing recess. There must be a clearance of not less than 150mm between the top of the flue pipe and any overhanging brickwork.

Any cavities or pockets above the register plate should as far as possible be filled and if necessary the flue pipe should be extended into the throat of the chimney and a soot door provided for chimney sweeping.

If a flue liner or insulated chimney is used, the size should not be less than 150mm.

In Fig. 3 the cooker is connected direct to a brick flue. Horizontal pipe runs between cooker and brick flue must not be used.

In Fig. 4 the cooker is connected to an existing brick flue with a length of flue pipe. Square bends and horizontal runs must not be used. There must be a cleaning door at every bend.

NOTE: WHATEVER METHOD OF INSTALLATION IS EMPLOYED. AIR MUST NOT BE ALLOWED TO ENTER THE CHIMNEY EXCEPT THROUGH THE COOKER. ALL JOINTS MUST BE AIR-TIGHT.

If the chimney is unlined, and there is any doubt about its condition, it should be lined in accordance with Current Building Regulations.

PROVISION MUST ALWAYS BE MADE FOR SWEEPING THE CHIMNEY

IMPORTANT: CEMENT TYPE PIPES AND FITTINGS MUST NOT BE USED WITHIN 2m OF COOKER. CHIMNEYS OF PLAIN PIPE ARE NOT RECOMMENDED BUT CERTAIN PROPRIETARY MAKES OF INSULATED CHIMNEY ARE SUITABLE.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Performance Minimum clearance to combustible materials 150mm HOT Water SystemBoiler Cooker Position Preparation of SiteAIR Supply Effect of Extractor FanFactory-Made Insulated Chimneys ChimneyChecking Existing Chimney Flue Layouts Cooker Flue ConnectionNo Bend Connections are Allowed Provision Must Always be Made for Sweeping the ChimneyHigh Updraughts InstallationLeave Instructions for Future USE Testing and CommissioningFirebrick Replacement

200SFW, 212SFW specifications

The Rayburn 212SFW and 200SFW are two exceptional models in the lineup of Rayburn stoves, renowned for their advanced features, technological innovations, and outstanding performance. Designed for efficiency and reliability, these stoves have become popular among homeowners who seek both functionality and style in their heating solutions.

One of the key features of the Rayburn 212SFW and 200SFW is their marked energy efficiency. Both models are designed to deliver maximum heat output while consuming minimal fuel, incorporating a well-insulated construction that retains heat effectively. This translates into reduced energy bills and a commitment to sustainability, making them ideal choices for environmentally conscious users.

The Rayburn 212SFW model stands out with its 12 kW output, while the 200SFW delivers a slightly lower but still impressive 10 kW. These outputs cater to various heating requirements, whether for cozy living spaces or larger areas needing consistent warmth. The ability to heat water is another significant advantage, with both models featuring a built-in back boiler option that can support central heating systems, which is especially beneficial during cold months.

Another notable characteristic of both models is their versatility. Users can choose between different fuel types, including wood, oil, or gas, allowing for tailored heating solutions that align with personal preferences and accessibility. The designers have also integrated a sophisticated flue system, which ensures efficient combustion and minimizes emissions, enhancing their safety and environmental friendliness.

Moreover, the Rayburn 212SFW and 200SFW are equipped with advanced control features that simplify operation and monitoring. The intuitive thermostatic controls make it easy to set and maintain desired temperatures, while the quality materials and craftsmanship guarantee durability and longevity.

In terms of aesthetics, Rayburn stoves are designed to complement various interior styles. With a classic yet contemporary appearance, these models feature a choice of finishes and colors that can enhance any kitchen or living area. The combination of style, performance, and ecological responsibility makes the Rayburn 212SFW and 200SFW standout choices for those in the market for high-quality stoves.

In summary, the Rayburn 212SFW and 200SFW are remarkable for their exceptional energy efficiency, versatile fuel options, and user-friendly features. Whether for heating large spaces or providing hot water, these models reflect the highest standards of modern stove technology, making them a valuable addition to any home.
Top Page Image Contents