Uniden BC 278CLT manual About the Unit, Helpful Hints

Page 38

ABOUT THE UNIT

Helpful Hints

General Use

■Turn the scanner off before disconnecting the power.

■Always write down the programmed frequencies in the event of scanner memory loss.

■If scanner memory is lost, simply reprogram each channel. The display shows

when there has been a memory loss.

■Always press each keypad button firmly until you hear the entry tone for that key.

Location

■If your scanner receives strong interference or electrical noise, relocate the scanner or its antenna away from the source of the noise. A higher elevation may provide better reception. Also, try changing the height or angle of the antenna.

■Avoid placing the unit in direct sunlight or near heating elements or vents.

■Do not plug the scanner into an outlet controlled by a wall switch as prolonged periods without power will cause the clock to reset.

Cleaning

■Disconnect the power to the unit before cleaning.

■To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub the display window.

■Do not use excessive amounts of water.

Repairs

■Do not attempt any repair. The scanner contains no serviceable parts. Contact the Uniden Customer Service Center or take it to a qualified repair

technician. (Page 37)

Birdies

■All radios are subject to receiving undesired signals or birdies. If your scanner stops during Scan mode and no sound is heard, it may be receiving a birdie. Birdies are internally-generated signals inherent in the electronics of the receiver. Press SCAN to resume scanning.

If you still cannot get satisfactory results and want additional information, or to return the unit for service, please call the Uniden Customers Service Department at the number on Page 37.

35

Page 37 Page 39
Image 38
Page 37 Page 39
Contents BC 278CLT Precautions Table of Contents Scanning Options What is Scanning?Introduction Types of CommunicationWhere to Obtain More Information Taking Proper Care of Your ScannerInstalling the BC278CLT Getting StartedOperation Controls and FunctionsScan Key 27 28 37 Scanning Overview AM,FMClock SET-UP Initial Clock Set-upUsing the Scanner Set the SquelchPage Programming Tips for scanner Programming Scanner Frequencies Deleting a Scanner Frequency Bank Scanning Scanning ModeAbout Memory Back-up Manual Mode Direct Channel Access Priority ScanningTo Set the Priority Channel To enter the Priority Scan ModeTo exit the Priority Scan Mode To Lock out a Channel Restore a Locked Out ChannelChannel Lockout Restore All Locked Out Channels DelayTo Set Delay in Scan Mode To Set Delay in Manual ModeTo search SearchingTo set the frequency range Search Hold mode Storing Search FrequenciesSearch Skip Service ScanWeather Channel SCANNER, Radio AM/FM or OFF Weather Alert with S.A.M.E About S.A.M.E Programming Fips CodeProgramming Radio AM/FM Frequencies Additional FeaturesLCD Backlight Press 0 to select channelPage Direct Channel Access for Radio Stations Deleting a Stored Radio FrequencyReset the Clock Time Set the Alarm Time Set Alarm to Tone Mode Snooze functionTurn the Alarm Off Set Alarm to Radio Mode Alarm remains onAbout the Unit Helpful HintsTroubleshooting Problem SolutionProblem Technical Specifications Above bands in 5 kHz stepsPage ONE-YEAR Extended Warranty Thank YOU

BC 278CLT specifications

The Uniden BC 278CLT is a highly regarded mobile scanner that caters to both amateur radio enthusiasts and professional users. Designed to deliver versatility and performance, this scanner is packed with features that enhance communication and monitoring capabilities in various scenarios.

One of the standout features of the BC 278CLT is its ability to monitor a wide range of frequency bands, including VHF, UHF, and 800 MHz. This makes it ideal for tracking local emergency services, public safety agencies, amateur radio operators, and even aviation communications. The scanner covers conventional channels and trunked systems, allowing users to hear everything from police and fire communications to local events and weather updates.

Equipped with a 500-channel memory bank, the BC 278CLT enables users to store numerous frequencies for quick access. The user-friendly interface, combined with a backlit LCD display, allows for easy navigation and visibility in various lighting conditions. Additionally, the scanner supports a programmable frequency storage feature, which means users can customize their channel lineup based on personal interests or specific monitoring needs.

Another key characteristic of the BC 278CLT is its advanced digital technology. The scanner is capable of decoding digital trunked signals, which are increasingly common among public safety and communication agencies. By including this technology, Uniden ensures users can stay informed about the latest communications in their area.

The BC 278CLT is also equipped with a built-in AM/FM radio, providing even more versatility for users. Whether it's enjoying casual talk radio or staying updated on news broadcasts, the added radio functionality makes it a comprehensive device for audio entertainment and information.

A robust locking mechanism helps prevent accidental changes to the scanner settings, ensuring that users can rely on its performance when it matters the most. The inclusion of a weather alert feature further enhances safety, as users receive immediate alerts about hazardous weather conditions in their vicinity.

In conclusion, the Uniden BC 278CLT stands out due to its array of features, including broad frequency coverage, significant memory capacity, and advanced digital technology. With its user-friendly design and added functionalities, this mobile scanner appeals to a diverse range of users, from hobbyists to professionals, making it a valuable tool for anyone looking to stay connected with their local communications landscape.
Top Page Image Contents