2Wire C424 manual Printing Weatherproof Paper from Tray

Specialty Paper

Weatherproof Paper

Weatherproof paper can be printed from any tray. You can load paper to the fill line in the tray, however, the printer has better feed reliability if you load fewer sheets in the tray.

For best results, use only Xerox Phaser Weatherproof Paper specified for your WorkCentre C2424 Copier-Printer.

To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies.

Guidelines

■Store weatherproof paper flat in the original packaging.

■Leave the weatherproof paper in its original packaging until you are ready to use it.

■Do not store weatherproof paper in extremely dry or humid conditions or extremely hot or cold conditions. Storing weatherproof paper in extreme conditions may cause it to jam in the system or cause print quality problems.

■Remove the weatherproof paper from the packaging and allow it to acclimate to the room temperature and humidity prior to printing.

■Do not leave the paper in the system when you are finished printing. This may cause the paper to curl and jam the printer.

■Rotate stock frequently. Long periods of storage in extreme conditions can cause the weatherproof paper to curl and jam the printer.

Printing Weatherproof Paper from Tray 1

1.Fan the weatherproof paper to release sheets that may be stuck together.

2.Insert the paper into Tray 1 as follows:

■Single-sided printing: Insert the side to be printed facedown with the top of page against the roller.

■2-sided printing: Insert side one faceup with the bottom of the page against the roller.

WorkCentre® C2424 Copier-Printer

5-36