REPLACING EMPTY KEG
Close shutoff valve from empty keg. To and E of "Installing
Keg
j.Support
on CO2 regulator then remove keg tappel tap a new keg, follow the procedures C, D Keg Tapper and Beer Keg."
Cabinet
Bottom
(1) Lift to upright
i
/
/
I
/
(2) Slide into cabinet.
Fig. 3
OPERATION
Place drip tray under beer faucet. To dispense beer, open beer faucet quickly all the way. If you have any trouble with beer, refer to "Draught Beer Facts" book.
The recommended pressure for the CO2 system is
CLEANING
1.To maintain
system is required. Complete cleaning kit is provided for
your convenience. Refer to the instructions included in cleaning kit.
2.To clean cabinet inside and outside, mix 2 tablespoons baking soda with 1 quarter warm water, or use mild soap. Never use strong cleanser, scouring powder or pads.
Do not put the drip tray in dishwasher, it is not dishwasher safe. Vacuum the tubing on outside back twice a year.
To provide protective care of the painted finish:
Regular applications of wax or polish provide vital protection against rust. Waxing cleans the surface and seals out moisture and other contaminants.
Use a wax or polish that is suitable for appliances.
Apply the wax or polish when the refrigerator is new and then at least twice a year.
Between waxings, clean the cabinet with the same polish or with a CLEAN soft cloth dampened with a mild household de- tergent. Rinse with a CLEAN lightly dampened cloth and DRY thoroughly.