Kenmore 7853*, 7852*, 7862*, 7857* Oven Control Functions, Setting Oven Controls, To Set the Clock

Oven Control Functions

READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below.

			BROIL	PAD Used to		UP and	DOWN ARROW		PADS	Used along
			select	the variable	broil	with the	function	pads to	select	oven
CLOCK			function,			temperature, time		of day,	clean	time and
		SET
PAD		Used
to	set the
time of		day				minute timer,
TiMERON/OFF				0	Q	_				•
PAD-- used to set
or cancel the minute
timer. The		minute
umer	aoes	not	start			O
or slop	COOKing					O
Also
						I
TIMER ON/OFF			3aa
s usea [o set [ne
Continuous		Bake
feature

7

FEATURE INDICATOR

LIGHTS--These light to show which feature is in

use.

BAKE PAD--Used to select the bake function.

STOP/CLEAR PAD--

Used to clear any function previously entered except the time of day and minute timer, Press STOP/CLEAR to

stop cooking, Also the

SELECT SELF-CLEAN PAD-- Used to select the

Self-Cleaning cycle. A 2, 3 or 4 hour Self-Clean

time may be selected.

OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self- Clean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks.

STOP/CLEAR pad is used to activate Oven

Lockout setting.

,Note; The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during prehea[ This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFE,your oven is ready.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Press ",o_'.... appears in the display.

2.Press and hold the _ until "HI" appears in the display.

3.Press and hold B,o_until °F or °C appears in the display.

4.Press the _ or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

Setting Oven Controls

Note:The time of day must first be set in order to operate the0Venl

To Set the Clock

When the range is first plugged in, or when the power

supply to the range has been interrupted, the display will flash "12:00".

1.Press (_ once (do not hold pad down).

2.Within 5 seconds, press and hold the /%. or V until the correct time of day appears in the display.

Note: The clock cannot be changed during a Self-Clean cycle.

To Set the Minute Timer:

,Press the A to increase the time in one minute

increments. Press and hold the _ to increase the time in 10 minute increments. The timer can be set for

any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If the V pad is pressed first, the timer will

advance to 11 hours and 59 minutes.

3.The display shows the timer countdown in minutes until

1 minute remains. Then the display will countdown in seconds.

4.When the set time has run out, the timer will beep 3 times and will continue to beep 3 times every 60

1. Press @.

seconds until @ is pressed.