Kenmore 795.6991, 795.6397, 795.7997 Unpacking Your Refrigerator, Base Grille Installation

Page 8

ExcessiveWeightHazard Usetwoormorepeopleto moveandinstall

refrigerator.

Failure to do so can result in back or other injury.

UNPACKING YOUR REFRIGERATOR

Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels or the model and serial number label.

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For

more information, see the Important Safety Instructions section.

Refrigerator shelves are installed in the shipping position.

Please reinstall shelves according to your individual storage needs.

! ff "3

3

When Moving Your Refrigerator: Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion or fire.

INSTALLATION

1.Avoid placing unit near heat sources, direct sunlight or moisture.

2.To minimize noise and vibration, the refrigerator MUST be installed on a solidly constructed floor.

3.Carpeting and soft tile surfaces are not recommended.

4.NEVER install the refrigerator on a platform or a weakly supported structure.

5.Install this appliance in an area where the temperature is between 55 °F (13 °C) and 110 °F (43 °C.) If the temperature around the appliance is too low or high, cooling ability may be adversely affected.

NOTE: For proper air circulation, best cooling and energy consumption results, maintain a minimum distance

of 2 inches (5.08cm) from adjacent items and surfaces.

(5.08 cm)

2"

2"

(5.08 cm)

(5.08 cm)

•Be careful when you work with hinge, base grille, stopper etc. You may be injured.

•Do not put hands or metal sticks into air vents, base grille or bottom of refrigerator. You may be injured or receive an electrical shock.

BASE GRILLE INSTALLATION

To install or replace Base Grille:

1.Open Refrigerator door.

2.Remove the 2 screws from the bottom front part of Refrigerator.

3.Place Base Grille into position and insert and tighten screws.

To remove the Base Grille

1.Open refrigerator door.

2.Remove screws from Base Grille and remove.

3.Reattach screws to the base of refrigerator.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Cn z Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.AAbout the Automatic Ice Maker InstallationTroubleshooting Guide Forte Year Limited Warranty Disclaimer of imptied warranties limitation of remediesMaster Protection Agreements Page To Connect Electricity Recommended Grounding MethodUSE of Extension Cords Before you throw away your old Refrigerator or freezerPage Installation Base Grille InstallationTo install or replace Base Grille Unpacking Your RefrigeratorRemove Freezer Door Remove Refrigerator DoorReplace Refrigerator Door Replace Freezer DoorReverse Freezer Door Reverseand Reattachrefrigeratordoor Hinge Pin Insert Reattaching Freezer Door Leveling and Door Closing Door AlignmentSetting the Controls Ensuring Proper AiR CiRCULATiONNext Refrigerator ControlAdjusting Control Settings Food Storage GuideItems Leafy vegetablesFreezing Storing Frozen FoodPackaging Adjustable Shelves Refrigerator ShelvesSlide Out Shelves On Some Models Snack Drawer On Some ModelsSNAP=ON Door Racks Crisper and Crisper CoverCrisper HUMiDiTY Control ICE Tray On Some Models Dairy BINGeneral Cleaning Tips OutsideDoor Liners and Gaskets Plastic Parts covers and panelsPower iNTERRUPTiONS When YOU GO on VacationWhen YOU Move Suffocation HazardWhen YOU should SET the Icemaker Operation iNSTRUCTIONSNormal Sounds YOU MAY Hear Personal injury HazardPower drill Before YOU BeginWhat YOU will Need Shut OFF the Main Water SupplyInstallation Instructions Choose the Valve Location Fasten the Shut OFF ValveConnect the Tubing to the Refrigerator Turn the Water on ATShutoff Valve Plug in the RefrigeratorUnderstanding Sounds YOU MAY Hear Refrigerator does not OperateVibration or Rattling Noise Check ifMotor Seems to RUN TOO Much Lights do not WorkCompressor Frost or iCE Crystals on Frozen Food ICE has OFF-TASTE or OdorThere is Water in the Defrost Drain PAN Refrigerator Seems to Make TOO Much NoiseDoors are DiFFiCULT to Open Automatic Icemaker does not WorkIcemaker On Some Models Check if ThenIiiiiiiiiiiiiiiiiiiiiiii
Related manuals
Manual 32 pages 17.7 Kb

795.7929, 795.7991, 795.6929, 795.6997, 795.7937 specifications

The Kenmore 795.6991, 795.7997, and 795.6997 models are part of Kenmore's lineup of high-efficiency, stylish French door refrigerators. Tailored for modern kitchens, they combine functionality with cutting-edge technology.

One of the standout features of these models is their spacious layouts. With a generous capacity, these refrigerators easily accommodate large groceries, making them ideal for families or anyone who enjoys cooking and entertaining. The French door design not only enhances accessibility but also maximizes storage space, allowing for the organization of various items, from fresh produce to beverage bottles.

In terms of cooling technology, these models are equipped with advanced cooling systems that ensure optimal temperature and humidity conditions. The Smart Cooling System manages airflow effectively, helping to keep food fresher for longer periods. This is complemented by the Dual Evaporator technology, which prevents odor transfer between the refrigerator and freezer compartments, ensuring food items maintain their original flavor.

The Kenmore 795.6991, 795.7997, and 795.6997 also showcase the convenience of smart features. These refrigerators can be connected to Wi-Fi, allowing users to control settings and monitor conditions remotely through a mobile app. This smart capability enhances user convenience, as it enables notifications for irregular temperature changes, so you can take immediate action to protect food quality.

Another notable feature is the ice and water dispenser, which provides easy access to chilled water and ice without needing to open the refrigerator door. This not only saves energy but also maintains the interior temperature, promoting better food preservation. Additionally, the slim in-door ice maker is designed to free up space in the freezer section, offering more room for frozen goods.

The aesthetic appeal of these models is also significant. With sleek stainless steel finishes and minimalist designs, they enhance the visual appeal of any kitchen decor. Their adjustable shelving allows for customizable storage solutions, adapting to users' needs for flexibility.

Overall, the Kenmore 795.6991, 795.7997, and 795.6997 models encapsulate a blend of style, efficiency, and advanced technology. These features make them exceptional choices for consumers seeking quality refrigeration solutions.
Top Page Image Contents